Loading ...
Loading ...
Loading ...
EN
www.newair.com 14
ASSEMBLY & INSTALLATION
Choosing a Location
Always keep the unit on a flat surface and in a dry place. Keep at least 20 inches
of space on all sides of the unit to maintain efficiency and safety.
Assembling the Exhaust
• Connect the exhaust pipe to the round joiner disc, turning counterclockwise
(as shown in Fig. 6).
• Connect the end of the exhaust pipe with the joiner disc to the exhaust
output on the back of the unit, turning counter-clockwise (as shown in Fig.
7).
• Connect the opposite end of the exhaust pipe to the window plate. The
plastic oval-shaped end if the pipe is meant to be inserted into the opening
in the window plate, pushed slightly to the side (to lock it in behind the 4
small latches) and then screwed into the plate through the holes in the end
of the exhaust pipe.
• Install the window plate on the nearest window, being careful to keep the
exhaust hose as straight as possible, to maintain efficiency.
Fig. 6
Fig.7
Caution:
The exhaust pipe extends from 24 to 67 inches long (including the plastic
adapters). We recommend keeping the pipe as short as possible (and as
straight as possible) to maintain efficiency.
The length of the exhaust pipe is designed in accordance with the
specifications of this air conditioner. Do not modify these parts or use
alternative parts, as it may cause damage to the unit or prevent it from
working efficiently.
Loading ...
Loading ...
Loading ...