Loading ...
Loading ...
Loading ...
USE - 79914779721/A
e
2. Select °C or °F.
3. Touch the
CONFIRM button to activate
the required temperature format.
Display brightness
1. Select
Display brightness.
2. Select from the options High - Medium -
Low.
3. Touch the CONFIRM button to confirm
the selection.
Weight type
1. Select Weight type .
2. Select kg or oz.
3. Touch the CONFIRM button to
activate the desired weight unit.
Connection setting (SmegConnect models
only)
• In the “settings menu ” touch the
CONNECTION SETTINGS button (at
the left in the lower area ).
System info
• In the “settings menu ” touch the
SYSTEM INFO button (at the right in
the lower area ).
Showrooms
• Touch the SHOWROOMS button on
the “settings menu ” (at the centre of the
lower area ).
Show Room (for showrooms only)
1. Select
Show Room.
2. Select On.
3.
Touch the CONFIRM button to
activate the Show Room mode
.
Demo Mode (for showrooms only)
1. Select
Demo Mode.
2. Select On.
This allows the display brightness level
to be selected.
The Display brightness function is
factory set to High.
Allows you to set the unit of
measurement to display the weight
value in kilograms (kg) or in ounces
(oz).
The Weight type function is factory set
to kg.
Menu where connectivity parameters
are displayed.
For CONNECTION settings
please refer to the "Built-in Oven
Connectivity" manual.
Menu displaying information about
serial number and software versions.
Menu dedicated to showrooms.
This mode deactivates all the
appliance’s heating elements, while
keeping the control panel active.
During normal operation, it is indicated
by the indicator light turning on in
the information area .
To use the appliance normally, set this
mode to Off.
The same as Show Room, when this
mode is activated, after a certain period
of inactivity, a demonstration of the
various screens that illustrate the
potential of the appliance is shown on
the display.
To use the appliance normally, set this
mode to Off.
Loading ...
Loading ...
Loading ...