Loading ...
Loading ...
Loading ...
INSTALLATION – Gas Hook-Up
For LP Gas Grills, it is shipped with a LP Medium Pressure Regulator
GAS REQUIREMENTS
Verify the type of gas supply to be used, either NG or LP, and make sure the marking on the appliance
rating sticker agrees with that of the supply. The rating sticker is located on the back of the Gas Manifold
Pipe. Never connect an unregulated gas line to the appliance. You must use the gas regulator provided
with the unit, even if the supply is controlled. An installer-supplied gas shut-off valve must be installed in
an easily accessible location. All pipe sealants must be an approved type and resistant to the actions of LP
gases. Never use pipe sealant on flare fittings. All gas connections should be made by a qualified technician
and in accordance with local codes and ordinances. Gas conversion kits are available from Customer care
by dialing 888-934-9449,press option #1. When ordering gas conversion kits, have the model number, and
the type of gas (natural or LP) from your grill.
BODILY INJURY:Before connecting LP tank to regulator, check that all grill burners and side burners,
smokers, and rotisserie valves are in the OFF position and open grill lid.
GAS SETUP – LP GAS HOOK-UP
Liquid Propane Gas Hook-Up
TheType1connection system hasthefollowingfeatures:
Thesystemwillnot allow gas
toflowuntilapositiveconnectionhasbeenmade.NOTE:The cylinder controlvalvemustbe turnedoff
beforeany connectionismadeorremoved.Thesystemhasathermalelement that willshut off the flowof gas
intheevent of afire. Thesystemhasaflow limitingdevicewhich,whenactivated,willlimit the
flowofgasto10cubic feet per hour.NEVERusegrill without leak testing.
PAGE 16
Loading ...
Loading ...
Loading ...