User Guide
Using the Z200 speakers
Your speakers connect to your audio-source device using a 3.5mm auxiliary connector.
To use your speakers:
1. Connect the power cable to the speakers and a power source.
2. Connect your source device using the attached 3.5mm auxiliary cable.
NOTE: You can also connect a device to the auxiliary input port on the front of the right
speaker (below the music note icon).
3. Turn the speaker on and adjust the volume using the Power/Volume knob.
4. Play music from your audio-source device.
5. Adjust the tone using the dial on the right side of the right speaker. (Optional)
You can also connect headphones to the headphone output port on the front of the right speaker
(below the headphone icon).
Distorted audio from the Z200 speakers
If the audio coming from your Z200 speakers sounds distorted, try these suggestions:
Make sure all cables and connectors are connected securely to both your speakers and
your device.
Adjust the volume on both the speakers and your audio source.
Adjust the tone level on the right speaker.
NOTE: If you're streaming audio content from the internet to your device, it could be the internet
connection and not your speakers causing the problem. Try audio that is stored on your device to
verify.
Loading ...
