Loading ...
Loading ...
Loading ...
Abouttheautomatic icemaker.
A newly installed refrigerator may take 12 to 24 hours to begin making ice.
On dispenser models, to Automatic Icemaker
access ice or reach the
power switch:
o Uftthe bin,thenpullit
foowarduntilthebinstops.
o Lowerthebintoaccessice
or reachthepowerswitch.
NOTE:Inordertotakefull advantage
ofthetilt-outicebin,onlystoreitems
ontheshelfbelowtheice binthat
arenotallerthanthelowestpoint
onthebin.
The icemaker will produce seven cubes
per cycle---approximately 100-130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room
temperature, number of door openings
and other use conditions.
ff the refrigerator is operated before the
water connection is made to the icemaker,
set the power switch in the 0 (ofOposifion.
When the refrigerator has been connected
to the water supply, set the power switch to
the I (on) position.
The icemaker will fill with water when it
cools to 15°F (-10oc). A newly installed
refrigerator may take 12 to 24 hours to begin
making ice cubes.
You will hear a buzzing sound each time
the icemaker fills with water.
Throw away the first few batches of ice to
allow the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
When the bin fills to the level of the feeler
arm, the icemaker will stop producing
ice. It is normal for sevelat cubes to be
joined together.
ffice is not used frequently, old ice cubes
win become cloudy, taste stale and shrink.
Specialnotesaboutdispensermodel_
!11Dispenser models have a tilt-out ice bin.
The bin can be tilted out as shown in
the illustrations, and it will hold itself
up while you take ice out or turn the
icemaker power switch on and off.
Be sure to put the bin back in place
before dosing the door.
m To restore your ice level from an empty
bucket stage, the following steps are
recommended:
12 hours after the first batch of ice
has fallen into the bin, dispense
3 to 4 cubes.
After an additional 6 hours, dispense
3 to 4 cubes again.
These steps will restore your ice level
in the shortest amount of time.
NOTE:Inhomeswithlower-than-averagewater
pressure,youmayheartheicemakercyclemultiple
tines whenmakingonebatchofice
_ Liftthebin,thenpullit
forwarduntilthebinStops.
Removing Ice Bin (dispenser models)
CAUTION:Theicebin is heavywhen full
Set the power switch to the 0 (off) position
before removing the bin.
When replacing the bin, be sure to press it
firmly into place, flit does not go all the
way back, remove it and rotate the thive
mechanism 1/4 turn. Then push the bin
back ag'ain.
Mechanism f
_ Liftandpull forwardagain
to removethebin.
12
Dispenser Models only
Loading ...
Loading ...
Loading ...