Loading ...
Loading ...
Loading ...
• Identify the short end of the shaft• Assemble a 1" long
spacer (S), a single spool assembly, a 133" long
spacer (T), a double spool assembly, another 1.33"
long spacer (T) and a 3/4" flat washer (N) onto the
short end of the shaft• See figure 3
1.33" LONG
3/4" FLAT SPACER (T)
WASHER (N)
1.33" LONG
SPACER (T)
/
DOUBLE SPOOL
ASSEMBLY /
SINGLE SPOOL
ASSEMBLY
1" LONG
SPACER (S)
SHORT END
OF SHAFT
FIGURE 3
• Assemble the end plates to the ends of the tray using
four 5/18" x 3/4" hex bolts (E) and four 5/16" nylock
nuts (J) for each end plate. Do not tighten until final
step. See figure 5.
, 5/16" x 3/4"
'_, HEX BOLT (E)
5/16" NYLOCK \
NUT (J)
/
FIGURE 8
\
• Assemble the middle brace onto the long end of
the shaft with the bent end of the brace facing the lift
lever Next assemble a 370" long spacer (R), a single
spool assembly, a 133" long spacer (T), a double
spool assembly, a 133" long spacer (T) and a 3/4" flat
washer (N) onto the long end of the shaft• See figure
4
LIFT MIDDLE
LEVER BRACE
3.70" LONG
SPACER(R)
133" LONG
SPACER (T)
/
SINGLE SPOOL
ASSEMBLY
DOUBLE SPOOL
ASSEMBLY 1.33" LONG
SPACER (T)
• Assemble the tongue to the tray using four 3/8" x 1"
hex bolts (D) and 3/8" nylock nuts (I) as shown in
figure 6. Tighten.
Assemble the two stop brackets (U) to the tongue
using four 1/4" x 3/4" hex bolts (O) and 1/4" nylock
nuts (K). Tighten. See figure 6
STOP
BRACKET
/
/
1/4" x 3/4'
HEX BOLT (O)
\
3/8" NYLOCK
NUT(I)
1/4" NYLOCK
NUT (K)
3/4" FLAT
WASHER (N)
FIGURE 4 REAR VIEW FIGURE 8
5
Loading ...
Loading ...
Loading ...