Loading ...
Loading ...
Loading ...
13
Figure 26
Figure 26a
Rotate the top of the coupler coun-
ter clockwise to extend the coupler
to the to the "OFF"position.
Coupler
extended
8. Locate the CO
2 tank in the corner of the refrigerator as
shown in Figure 25 and secure with the chain. Close
the faucet handle on the tower.
9. Hooking up the keg coupler to the keg: Verify the cou-
pler is in the "OFF" position (see Figure 26a).Align the
lugs on the keg with the corresponding openings on the
keg coupler and turn clockwise until the coupler stops
(about 90°). Push down and twist the top of the coupler
clockwise to allow gas to enter the keg.
Figure 25
Chain-The chain is fastened and taped
to the top of the interior liner. Remove
the tape and secure the CO
2 tank in
place in the back right corner.
Push faucet handle back toward
tower to close the faucet
USING YOUR BEER DISPENSER
Lugs
on keg
Figure 26b
Loading ...
Loading ...
Loading ...