Loading ...
Loading ...
ASSEMBLY INSTRUCTIONS
3
Outlet Box
STEP :2
a. Secure the crossbar assembly (AA) to the outlet
box (not included) with the outlet box screws (CC).
b. Tighten until snug.
Note:
The preassembled mounting screws on the
crossbar assembly (AA) should protrude outward.
AA
CC
STEP :3
a. Fit the ceiling canopy (A) to the crossbar assembly
(AA) and secure with the mounting balls.
Note: The ceiling canopy should be snug against
the ceiling and the mounting balls.
If this does not work, adjust the length of the
mounting screws on the crossbar assembly (AA)
by unscrewing the preassembled hex nuts.
Then, screw the mounting screws in or out of the
crossbar until the desired length is achieved.
Once the ceiling canopy (A) is secure, remove the
mounting balls and ceiling canopy (A) and proceed
to Step .4
Mounting
Screw
Mounting Ball
Hex Nut
AA
A
B
C
STEP 1:
a. Remove the mounting balls and the crossbar
assembly (AA) from the ceiling canopy (A). Refer
to the diagram in .Step 3
b Pass the supply wires and the ground wires.
through the ceiling canopy (A) and the center
column (B).
c. Thread the ceiling canopy (A), the center column
(B) and the socket assembly (C) together as
shown. Hand-tighten until snug.
A
STEP 1
STEP 2
STEP 3
Loading ...
Loading ...