Loading ...
Loading ...
Loading ...
USE - 75914779671/E
e
casseroles in the centre of the racks and
make sure that their width/diameter does
not exceed 30 cm.
• Place the racks leaving one free shelf
between them.
• Depending on the food and the increased
load inside the cavity, cooking on two levels
may take a few minutes longer than on a
single shelf.
• The functions indicated for cooking on two
shelves are THERMALLY-VENTILATED and
THERMALLY-VENTILATED BASE.
Advice for steam cooking
• For bread-type products (bread, focaccia,
etc.) and frozen desserts, where steam is
useful during the first few minutes of cooking,
we recommend setting a steam function for
the first 5-10 minutes and then switching to
ventilated mode to complete cooking.
• For steam heating insert in a cold oven.
Advice for defrosting and proving
• Place frozen foods without their packaging
in a lidless container on the first shelf of the
oven.
• Avoid overlapping the food.
• To defrost meat, use the rack placed on the
second level and a tray on the first level. In
this way, the liquid from the defrosting food
drains away from the food.
• The most delicate parts can be covered with
aluminium foil.
• For successful proving, a container of water
should be placed in the bottom of the oven.
To save energy
• Stop cooking a few minutes before the time
normally used. Cooking will continue for the
remaining minutes with the heat which has
accumulated inside the oven.
• Reduce any opening of the door to a
minimum to avoid heat dispersal.
• Keep the inside of the appliance clean at all
times.
Advice on using the probe (if fitted)
The probe can also be used during normal
timed cooking:
1. Insert the probe into the food you are
cooking, and connect it to its socket.
2. Press the button and check the
temperature of the food in the Instantaneous
temperature field.
Using the temperature probe (on
some models only)
The temperature probe enables you to cook
roasts, loin steaks and other cuts and sizes of
meat with great precision. The probe ensures
that the food is perfectly cooked by monitoring
the core temperature of the food. The core
temperature is measured by a sensor inside the
tip of the probe.
Positioning the probe
1. Place the food on a tray.
2. Insert the tip of the probe into the food
before you place it in the oven.
3. For best results, make sure that the
temperature probe is placed transversely in
the thickest part of the food and for least 3/
4 of its length. Make sure that it does not
touch the tray underneath and that it does
not protrude from the food.
See General safety instructions.
Do not install any telescopic guides on
the fourth shelf from the bottom, as they
would not allow access to the
temperature probe side socket.
In order for the probe to measure the
core temperature of the food precisely,
its tip must not be in contact with bones
or fat.
The recommended minimum
temperature for cooking with the probe
is 120°C, with the exception of slow
temperature cooking.
Loading ...
Loading ...
Loading ...