Loading ...
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Wash & Dry Mixed
Use this cycle to wash and dry mixed garments (cotton and synthetics) in
less than 4 hours. This cycle may be used to wash and dry loads of up to half
of the machine drying capacity; we recommend the use of liquid detergent.
Wash & Dry XL Bed & Bath
This cycle is suitable for washing and drying without interruption cotton
bulky items, like bed linens and towels, with the possibility to fully load
the machine; we recommend using liquid detergent.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics
Specic for synthetic items (e.g. polyester, polyacrylic, viscose, etc.). If the
dirt is dicult to remove, the temperature can be increased up to 60° and
powder detergent can be used too.
Wool - Wool Care
The wool wash cycle of this machine has been approved by
The Woolmark Company for the washing of machine washable
wool products provided that the products are washed
according to the instructions on the garment label and those
issued by the manufacturer of this washing machine. The
Woolmark symbol is a Certication mark in many countries.
(M2222)
Delicates
For washing very delicate garments. For best results, turn the garments
inside out and use liquid detergent. If a time-based drying option is
added, a particularly delicate drying cycle is performed at the end of the
wash cycle, thanks to light handling and appropriate temperature control
of the water jet. The recommended durations are:
1 kg of synthetic garments --> 165 min
1 kg of synthetic and cotton garments --> 180 min
1 kg of cotton garments --> 180 min
The degree of dryness depends on the load and fabric composition.
Anti Allergy
Suitable for removing major allergens such as pollen, mites and cat or
dog hair.
Anti Stain
This program ensures stain removal at low temperatures, preserving
fabrics and colours. It is suitable to heavily-soiled garments with resistant
colours. When running the program, do not mix garments of dierent
colours. We recommend the use of powder detergent.
Steam Refresh
This programme refreshes garments by removing bad odours and relaxing
the bres and it is meant for dry, unsoiled items.
Insert dry items only (that are not dirty) and select programme “Steam
Refresh”. The garments will be damp once the cycle is completed, so we
recommend hanging them to dry (2 kg, roughly 3 items).
The “Steam Refresh” programme makes ironing easier.
! Do not add softeners or detergents.
! Not recommended for wool or silk garments.
Spin & Drain
Spins the load then empties the water. For resilient garments. If you
exclude the spin cycle, the machine will drain only.
Rinse & Spin
Rinses and then spins. For resilient garments.
Wash 20°C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Eco 40-60
For washing normally soiled cotton garments declared to be washable at 40 °C
or 60 °C, together in the same cycle. This is the standard cotton programme
and the most ecient in terms of water and energy consumption.
! The cycle runs only at 40°C as per regulation.
Intense 60-90°C
For heavily soiled whites and resistant colours.
Rapid Wash
For washing lightly soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Wash & Dry XS Rapid
This cycle is to wash and dry without interruption small garments or
T-shirts in dierent fabrics and colours up to 1kg in 45’. To achieve
optimum results, use liquid detergent.
DISPLAY
The display is useful when programming the machine and provides a
great deal of information.
Area A: here will appear the icon and programme selected, the washing
and drying phases and time remaining to the end of the cycle. Area B:
shows the the two modes relative to the ACTIVE CARE option. Area C:
shows the indicator lights relative to the available functions. Area D:
displays the time remaining to the start of the selected cycle if the Delay
Timer option was set.
Area E: will display the maximum available spin speed on the basis of the
set cycle; if the cycle does not include the spin cycle setting, the dimly lit
“--” symbol will appear in the area.
Area F: will show the temperature value that can be selected on the basis
of the set cycle; if the cycle does not include setting of the temperature,
the dimly lit “--” symbol will appear in the area.
SELECT LANGUAGE: the rst time the machine is switched on, you will be
asked to select the language and the display will automatically show the
language selection menu.
To select the desired language press the X and Y buttons; to conrm the
selection press the Z button.
To change the language switch o the machine and press buttons G, H, I
simultaneously until an alarm is heard: the language-selection menu will
be displayed again.
DISPLAY BRIGHTNESS: to change the display luminosity, which by
default is set to the highest value, switch the machine o then
simultaneously press buttons G, L and M until the buzzer sounds.
Press buttons X and Y to choose the desired level of luminosity then
conrm by pressing button Z.
! During the wash cycle or when the Delay Timer option has been enabled,
if the user does not interact with the display for 1 minute the SCREEN SAVER
activates. To return to the previous window, simply press any button.
LOCKED DOOR INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before attempting to open the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened.
FIRST-TIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the “Auto
Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
“TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; “HOTPOINT” will appear on the display; the
indicator light relative to the START/PAUSE button will ash slowly.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the “DETERGENT DISPENSER
DRAWER” section.
- Close the door.
- Use the WASH CYCLE selector knob to select the desired wash cycle: the
cycle’s name will appear on the display; the cycle will be associated with a
specic temperature and spin speed which can be modied. The duration
of the cycle will appear on the display.
- Modify the temperature and/or spin speed: the machine automatically
selects the maximum temperature and spin speed set for the selected
wash cycle; these values cannot therefore be increased. Pressing the
button gradually reduces the temperature down to the cold wash setting
(the “--” symbol will appear on the display). Pressing the button
gradually reduces the spin speed until it is completely excluded (the “--”
symbol will appear on the display). Pressing the buttons further restores
the maximum allowed values for the selected cycle.
- Select the desired options.
STARTING CYCLE
Press the START/PAUSE button.
The machine will lock the door ( symbol on) and the drum will start to
rotate; the door will be unlocked ( symbol o) and then locked again
( symbol on) as preparation phase of each washing cycle. The “Clicking”
noise is part of the door locking mechanism. Water will enter the drum
and start the washing phase once the door is locked.
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash. To start the wash cycle from the point at which it
was interrupted, press the START/PAUSE button again.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button (the relative indicator light will ash),
then select the desired cycle and press the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This will be indicated by the word “CYCLE END” on the display; when the
symbol switches o, the door may be opened. Open the door and
switch o the machine. If you do not press ON/OFF button, the
washing machine will switch o automatically after about a 10 minutes.
Close the water tap and unload the washing machine. Leave the door ajar
to allow the drum to dry.
OPTIONS
- If the selected function is incompatible with the set wash cycle, the
relevant indicator light will appear dimly lit; the incompatibility will also
be signalled by a buzzer (3 beeps) and the wording “This action is not
allowed” will appear on the display.
- If the selected function is incompatible with another previously set
function, the wording “This action is not allowed” will appear on the
display and the function will not be enabled.
2:55
90°
1200
--
WASH & DRY
MIXED
H
G
Y
X Z
I
L M
A
B
C
C
D
E
C
F
Loading ...
Loading ...