USER MANUAL
For more products please visit www.brookstone.com
Smart Baby Monitor
and Camera
FCC ID: 2AQ7B-IPC163
For more products please visit www.brookstone.com
FCC Statement:
1. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
2. This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20cm between
the radiator and any part of your body.
For more products please visit www.brookstone.com
WARRANTY INFORMATION
One Year Limited Warranty.
Customer Service: 732-994-2301; email: [email protected]
©Smartpoint LLC,
250 Liberty Street Metuchen NJ, Suite 1A
The BROOKSTONE trademark, names and logos are owned by
BKST Brand Holdings LLC ©2020. All rights reserved
Manufactured, marketed and distributed by Smartpoint LLC, under license
Google, Android and Google Play are trademarks of Google LLC.
App Store
®
is a registered trademark of Apple, Inc
All trademarks and Registered trademarks are property of their respective owners
Made in China
SPECIFICATIONS
Model: BKWIFICAMB
Resolution:1920x1080
Alarm: Motion and sound detection
Night Vision: up to 5m
Frame rate: Up to 15 fps
Sensor: 1/3 CMOS
Viewing Angle: 100°
Audio: Microphone & Speaker built-in
Micro SD Card Storage: Up to 32GB
Compression: H.264
Power: 5V/1A (USB)
Operating System:
Android™ 8.0 or higher, iOS 10.0 or higher
Items included in package:
Camera, Magnetic Stand, Silicone Teddy Bear Stand,
Adapter, USB Cable, Mounting Kit and User Manual.
FEATURES
• Wi-Fi remote controlled through App
• Night vision
• Motion detection
• Sound detection
• Dimmable night light
• Two-way audio
• Live video
• Video recording
• Takes still photos
• Detects temperature in room
• Plays 3 different lullabies and white noise
Items included in package:
Camera, Magnetic Stand, Silicone Teddy Bear Stand,
Adapter, USB Cable, Mounting Kit and User Manual.
PRODUCT CONFIGURATION
Items included in package:
Camera, Magnetic Stand, Silicone Teddy Bear Stand,
Adapter, USB Cable, Mounting Kit and User Manual.
1
2
8
7
6
5
4
3
13
12
9
10
11
1. Reset Button
2. Micro SD Card Slot
3. Temperature Sensor
4. Light Sensor
5. Built-in MIC
6. Lens
7. Indicator Light
8. Night Lamp
9. Micro USB
10. Tripod
11. Dual Speakers
12. Magnetic Base
13. Teddy Silicone Case
DOWNLOAD APP
Brookstone Smart
1. Android: download “Brookstone Smart” app
on Google Play.
2. iPhone: download “Brookstone Smart” app
from the App Store.
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.
*
REGISTRATION AND LOGIN
1. Run the “Brookstone Smart” app from your
smart phone.
2. Register and login.
*
Screenshots may slightly differ from actual app.
*
1. Plug in the Camera and wait for red light to blink
rapidly and you hear a chime. If it doesn’t, press
reset button for 3-6 seconds with the included pin,
then release and the wait for red light to blink
rapidly. Light will start blinking and you will then
hear a chime sound. Camera is now ready to be
set up.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Camera from
the list of devices to add.
ADD DEVICE
4. Press the “next step” button
5. Make sure phone is connected to the Wi-Fi
network that the device will be connected to.
Enter your password for the Wi-Fi network.
6. Follow the directions in the app and hold the
QR code on the screen in front of the view of the
camera.
7. Connecting process will begin. Do not turn off
Wi-Fi Camera or phone while connecting. Wait for
connection process to complete.
8. Once device has been successfully added, name
the device what you would like it to be called in
the app. The Wi-Fi Camera is ready for use.
PUSH NOTIFICATIONS
1. You can turn on/off notifications for all devices
connected to app by clicking on the “Me” button at the
bottom right of the screen.
2. Then click on ”Settings” button. From there you can turn
on/off all notifications.
3. To view notifications in the app, click on “message
center” on the “me” tab on the bottom.
REMOVE A DEVICE
1. From the home screen, click on the device you would like
to remove.
2. Then click on the edit symbol on the top right of the
screen.
3. From there you would then click the “Remove Device”
button at the bottom of the screen.
MAGNETIC STAND & SILICONE BEAR COVER
Stand and Mount options
The camera comes with two different stand choices.
1. You can place the camera in the soft silicone bear stand to
have it appear as a toy so that your baby or child will enjoy
what it looks like.
2. You can also place it in the magnetic base and use it as a
normal smart camera. The base allows the camera to be
pointed in almost any direction and you can use the holes in
the bottom to mount on the wall.
APP FUNCTIONS
Live Video
To view live video simply click on the device under “All
devices” and select the camera you just added. Hit the full
screen button in the top left corner to see your live footage
at full screen on your phone.
To hide the control panel, you can press the top right
button. To view the control panel again, press the same
button again.
Video Recording
To record video press the “camera” button at the top of the
control panel. To end recording, press the “camera” button
again. The photo and video will be saved in the APP(iOS) or the
photos and video section(Android). To view recordings, press
“gallery” button.
Note: If you don’t have a Micro SD Card in the camera, Cloud
Storage Can be purchased by pressing the “Cloud” button on the
bottom of the main screen.
Taking a Photo
To take a photo, press the “camera” button. To view your
photos, press the “gallery” button.
Infrared Night Vision
Night vision mode can be set to Auto/Off/On. The change
modes, press the “Night Mode” button. Auto is default,
which means the infrared night vision is controlled by the
camera automatically. When the area around the camera
gets too dark, the infrared night vision activates automati-
cally. When the area around the camera is bright again, the
night vision deactivates automatically.
Two Way Audio
To activate two way audio, press the “speak” button. When
the button is orange, whatever you say into your phone will
come out of the speaker on the camera. You can also hear
at the same time any sounds from the live video on the
camera.
Device Volume
To change the volume on the camera, press the “device
button” and then you will be able to change the volume on
the camera.
Motion and Sound Detection
The camera uses infrared sensors when someone/something
appears within its detection area. It also detects sound so you can
hear if your baby is crying. Push notifications will be sent to your
phone once motion or sound is detected.
To access controls of the detection alarm settings, press the camera
setting button at the top right. You can also get to this from
pressing the “Motion Detection” or “Sound Detection” button on the
main camera page. You can also set a time window of the day
that the alarms will go off by pressing “Schedule” on this page.
To view videos recorded via motion detection press “Playback” on
the main screen. You must have a Micro SD Card in the camera or
have cloud storage enabled to view these saved videos.
Theme Color
The control panel can be set to “Light Mode” or “Dark
Mode”. To change this, press “Theme Color” and a pop up
menu will let you select light or dark mode.
Private Mode
The camera has a private mode. When the private mode is
turned on the camera goes to sleep. You can turn this mode
on from the main screen by pressing “Private Mode”
Anti-Flicker
The camera has an “Anti-Flicker” setting if you notice
flickering in your footage. Select it from the main screen
and choose which frequency works best.
Night Light
The camera has a night light feature that is dimmable.
From the main camera screen, press “Light” and the options
to control the night light will pop up. You can adjust the
dimness from this screen or set a timer for it. When the
camera is in the silicone bear cover the light is still visible.
Lullaby’s and White Noise
The camera can play 3 different lullaby songs along with
the option of just playing white noise. To control this
feature, on the main camera screen scroll to the bottom and
press “Lullaby”. From there, you can control the volume,
have the song set on repeat and pick which song you would
like the camera to play.
Viewing Temperature in Room
The camera can tell you the temperature of the room it is in.
To get to this feature, scroll to the bottom on the main
camera screen and press “Temperature”. From there you
can view the temperature and have the camera send an
alert if the temperature gets to an undesired level. You can
also change the temperature to Celsius or Fahrenheit.
Hub controls (sound, video quality, zoom in/out)
You can control features from the live video feed. There is a
volume button that is used to mute and unmute the live
feed. There is also a button for the video quality and it can
be used to switch between standard and high definition
resolution. In the top right there is also a button that can be
used for zooming in or out on the footage.
Sharing the Device
To share access to your camera with someone else’s
Brookstone Smart account, press the camera settings button
at the top right of the main camera screen. Then hit “Share
Device”. On the next page press “Add Sharing” at the
bottom. After that, enter the email on the person’s
Brookstone Smart account that you would like to share the
camera with. They will get a notification to accept and after
that the other person will have access to view your camera
through the Brookstone Smart app on their phone.
