Loading ...
Loading ...
Loading ...
TO REPLACE BAG:
Fold the safety
seal tab on the
new dust bag
away from the
opening that
fits on the dirt
tube°
NOTE: See PARTS AND FEATURES for
Dust Bag #.
Unfold the new dust bag.
Insert the dust
bag onto the dirt
tube completely
"_...... by holding the
dust bag collar
and pushing it
onto the dirt tube
Position
the dust
bag cover
so its posi-
tioning tab
fits into
the body
positioning
slot.
a ! r-'osidoning
_ _ Dust Bag
/ _ cover
/
Close the
dust bag
cover,
You will hear
a distinct
snap when
cover is
securely
closed.
Check the motor filter frequently and clean
when dirty,
WARNING
Electrical Shock Hazard
Do not operate the cleaner without
the motor safety filter° Be sure the
filter is dry and properly installed to
prevent motor failure andlor electri-
cal shock.
Remove the dust bag as outlined in the
DUST BAG CHANGING section.
tf the filter, located in the bottom of the dust
cover cavity, is dirty, remove it by pulling for-
ward out from under the ribs.
Wash the foam filter in warm soapy water,
rinse and dry thoroughly by squeezing the
filter in your hand and letting it air dry-
DO NOT wash in the dishwasher.
DO NOT install damp.
Repiace the foam filter by sliding it back into
place under the ribs in the dust cover cavity
Replace the dust bag as outlined in the
DUST BAG CHANGING section.
11
Loading ...
Loading ...
Loading ...