Loading ...
Loading ...
Loading ...
Programmable functions
79
Control field standby status
To save energy, the time display and
sensor controls will go out once the
programme has been running for
10minutes. In this case, the Start/Add
laundry sensor control flashes slowly.
However, there is no switch-off in the
event of a fault.
Options
= Off
The time display and sensor
controls do not go out.
= On (factory default setting)
The time display and sensor
controls will go out once the
programme has been running
for 10minutes.
“Switching on” the display again
- Touch the Start/Add laundry sensor
control. This will not affect a running
programme.
Memory
You can set the following: The elec-
tronic module will save the drying level
and any options selected for the cur-
rent drying programme. It will also
save the duration of the Warm air pro-
gramme. When the programme is se-
lected again, these saved settings will
appear in the display.
Options
= Off (factory setting)
= On
Exception:
The Cottons programme will re-
main unchanged.
Anti-crease
The drum will continue to rotate in a
special anti-crease rhythm for a max-
imum of 2 hours after the end of the
drying process. This helps prevent
creasing if laundry is not going to be
removed immediately. You can reduce
the duration of the anti-crease phase.
Options
= no Anti-crease
= 1 hour
= 2 hours (default setting)
Loading ...
Loading ...
Loading ...