Loading ...
Loading ...
Loading ...
MAINTENANCE INSTRUCTIONS
NOTE:
Thedeck shouldbe set sothat the rearofthe deck is 1/4"
lowerthan the front.See Figure69.
FRONT
X • 1/4"
33" DECK SHOWN
P'/////;! REAR
FRONT TO REAR LEVEL- FRONT LIFT ROD
If the sector plates are in their lowest setting and proper L__ MEASUREFROM
level cannot be obtained, adjust the front liftrod as follows: BLADETIPSTOFLOOR
x
f
FIGURE 69
Movedeck lift leverto #5 position.
30" & 33" DECK
Place a 2X4 woodenblockon edge underfrontcenter of
deck.
Place a 3X3 wooden blockunder rearcenter of deck.
NUT
/
/
Remove hair pins and washers securingsectorplates.
Lowerrear of deck onto3X3 block. See Figure68.
Removehairpinand washer securingfrontliftrodtofront
liftarm. See Figure 70.
Removefront lift rod andcarefullyrestfrontof deckonto
2X4 block.
Loosenjam nuton front liftrod.See Figure70.
•HAIR PIN
_ FRONT UFT ROD
FIGURE 70
Turnfrontliftrodhangerblockuntilitcan be reinstalledinto
frontlift arm withoutliftingdeck. See Figure70.
Secure lift rodto liftarm withwasher and hair pin.
Placesector platesonto rearhanger bracketsandsecure
withwashers and hair pins.
Raisedeck and remove wooden blocks.
Repeat steps for frontto rear level adjustment.Referto
FRONT TO REAR LEVEL- SECTOR PLATESo
Make certainsector plates are mountedin the same I
holes on each sidefor proper front to rear level. I
33
Loading ...
Loading ...
Loading ...