Loading ...
Loading ...
Loading ...
USAGE SYSTEM
PANEL OPENING
It is possible to open the grease lter cover panel
pulling it gently, as shown in g. 1.
The panel is xed with three magnets, there
are two safety cables to release in order to re-
move the panel from the product.
For the proper functioning, it is recommended to
install the product at a maximum distance of 2000
- 2100 mm, from the oor level.
Before proceeding with the installation of the ap-
pliance, check that all the components are not
damaged otherwise, please contact the dealer
and do not continue with the installation.
Use an air outlet pipe with a maximum length of
no more than 5 metres.
- Reduce the number of curves in the duct as
each curve reduces the suction efciency equi-
valent to 1 linear meter. (E.g.: if 2 90° curves are
used, the length of the duct should not exceed 3
meters in length).
- Avoid drastic changes of direction.
- Use a duct with a diameter of 150mm constant
over the entire length.
- Use a duct of recognized and approved mate-
rial.
To avoid a possible re risk,
follow the instructions given
for cleaning the grease lters
and removing any grease de-
posits on the unit.
16
Loading ...
Loading ...
Loading ...