Loading ...
Loading ...
Loading ...
AS YOU COMPLETE _ R, _O';
REGULAR SERVICE Y _ _'_ SERVICE DATES
Check Tire PreSSure
Check Operator Presence and
T Interlock Systems V #
R Check for Loose Fasteners if I_1 I_
cA Shat_oerdRep_ace Mower Blades i4
T : Lubrication Chart V*
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling I1_
Adjust Blade Bolt(s) Tension VIs
Adjust Motion Drive Belt(s) Tension
Check Engine Oil Level If
Change EngineOil 1_1.2.3 I_
E Clean Air Filter
a Clean Air Screen
G Inspect Muffler/Spark Attester I_
Replace Oil Filter (If equipped) _
E Clean Engine Cooling Fins V#2
Replace Spark Plug _ I_
ReplaceAirFilter Paper Cartridge !1_2
I
Replace Fuel Filter t/
1 - Change more often when operating uPAer a IleaW load c_ in h_ghamblant temperatures, S- If equipped wit h &djustabla system,
2 ° Sewlce more often when operating in dirty or dusty cond#ion=, 6 °Not required If equipped with mainlenance-free batteP/
3 ° If equ_ped wIfh oll filter, change o_1every 50 hours, 7 - Tighten front axte pivot bo_tto 35 S-Ibs, maximum
4 - Replace b_des more often when mowing In undy =oil, Do not ovefllgMen,
GENERAL RECOMMENDATIONS
LUBRICATION CHART
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and interlock
systems for proper operation.
• Check for loose fasteners.
Zerk
(_)Front
Wheel
Bearing
Zerk
- Spindle (_
Zerk
Wheel
Bearing
Zerk
_) Engine
I
"-, T-" Gearshift
.... _ _---" Pivots
O SAE 30 or 10w30 motor oil
General Purpose Grease
_) Refer to Maintenance =ENGINE"
Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricat-
ing bearings. If you feel they must be
lubricated, use only a dry, powdered
graphite type lubricant sparingly.
17
Loading ...
Loading ...
Loading ...