Loading ...
Loading ...
Loading ...
14
1.
1
If you do NOT wish to use the light kit, remove 3
switch housing cap screws (N) from switch housing
cap (M) located on switch housing preassembled to
motor housing (D). Pull down gently on switch
housing cap (M).
Locate wires in switch housing labeled FOR LIGHT
and gently pull molex connections apart in order to
disconnect switch housing cap (M) from switch
housing.
3.
Hardware Used
Cap
x 1
AA
Place cap (AA) firmly in hole in middle of switch
housing cap (M). Align holes in switch housing cap
(M) with holes in switch housing, then re-tighten
switch housing cap screws (N) previously removed.
3
2
F
L
M
2.
INSTALLING FAN WITHOUT LIGHT KIT
Molex
Connections
M
N
K
Remove the hex nut (K) and lock washer (L)
from the threaded rod at the top of the light kit
fitter (F). Unscrew the switch housing cap (M) to
remove it from the light kit fitter (F), and then
gently feed the BLACK and WHITE wires from
the light kit fitter (F) through the hole in the
middle of the switch housing cap (M).
WHITE
BLACK
AA
N
N
M
Switch Housing
Switch
Housing
D
Loading ...
Loading ...
Loading ...