Kenmore 79568039216 top-mount refrigerator

User Manual - Page 10

For 79568039216.

PDF File Manual, 72 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10
Shock Hazard:
To reduce the risk of electric shock, do not install the
refrigerator in a wet or damp area.
WARNING
2” (5.08 cm)
2” (5.08 cm)
2” (5.08 cm) 2” (5.08 cm)
INSTALLATION
The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for
115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes.
This provides the best performance and also prevents

hazard from overheated wires. It is recommended that a
separate circuit serving only this appliance be provided.
LEVELING and DOOR ALIGNMENT sections
1. To avoid noise and vibration, the unit must be

required, adjust the leveling legs to compensate for

higher than the rear to aid in door closing. Leveling
legs can be turned easily by tipping the cabinet
slightly. Turn the leveling legs clockwise to raise the unit
LEVELING and
DOOR ALIGNMENT sections
NOTE: Installing on carpeting, soft tile surfaces,
a platform or weakly supported structure is not
recommended.
2. Install this appliance in an area where the temperature

temperature around the appliance is too low or high,

3. Select a place where a water supply can be easily
connected for the automatic icemaker.
NOTE: The water pressure must be between 20 and


4. Too small of a distance from adjacent items may
result in lowered freezing capability and increased
electricity consumption charges. Allow at least 24

doors.
5. If a reverse osmosis water ltration system is
connected to your cold water supply, the water pressure
to the reverse osmosis system needs to be a minimum

2

2
, less than

Please refer to Connecting the Water Line section

system.
PRIOR TO USE
1.
dust that accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Allow your refrigerator to run for at least two to three

cold air in the freezer compartment to ensure proper
cooling. Your refrigerator is now ready for use.
REFRIGERATOR INSTALLATION
Loading ...
Loading ...
Loading ...