Loading ...
Loading ...
Loading ...
5
- The pilot light will switch on.
- The kettle will automatically switch o once the water
is boiled (the ON/OFF switch will click upwards and the
lights will switch o ).
- To turn the kettle o before the water boils, you may
move the ON/OFF switch up to the OFF position, or simply
lift the kettle from its base it will switch o and the switch
will return to the OFF position automatically.
Pouring
- Remove the kettle from the power base and carefully
pour out the water. Do not tilt the kettle suddenly or pour
water out at too sharp an angle.
- When you lift the kettle from the base, you may see
moisture on the top surface of the base. Condensation on
the base is perfectly normal, and should not be a cause for
alarm.
Please note: Empty the kettle after each use. Rinse the
kettle with fresh water if you have not used for more than two
days. To reduce energy consumption and waste of water, use
only the amount of water you need.
SAFETY DEVICES
1) Automatic ON/OFF switch:
Your kettle is tted with an ON/OFF switch which
automatically switches o once the water has boiled. If
the kettle has just boiled, wait a minute or so before re-
boiling the kettle. Do not attempt to hold the ON/OFF
switch in the on position or adjust the switch mechanism.
2) Safety cut-out:
If the kettle is switched ON with too little or no water, it is
protected against damage by a safety cut-out which will
switch o the power. If this cut-out operates, disconnect
the kettle from the mains supply and leave to cool down
before relling with cold water (otherwise the element
could be damaged).
3) If kettle is lifted from base while operating (ON), it will
automatically switch o.
MAINTENANCE
Cleaning the kettle
- Allow the kettle to cool down fully and disconnect the
appliance from the mains before cleaning.
- Do not immerse the kettle or base in water.
- To maintain the precious nish of the appliance, we
recommend cleaning the outside of the appliance with a
damp cloth and water only.
- DO NOT use metal polish, ammable liquids or harsh
scouring agents.
- Ensure that all connectors and sockets are kept dry.
Scale
When the water is heated, the minerals in the water solidify,
making the water appear cloudy. As soon as you notice a lm
forming on the water, or, when cleaning the lter, if you notice
a lm on the walls or the element, descale the kettle and its
lter.
Scale lter
Your kettle is tted with a scale lter to prevent loose particles
of scale being poured into your beverage. This lter is both
removable and washable. You should remove and clean the
water lter when you notice any deposits being left on the lter
or if the pouring eciency is impaired.
Removing the scale lter
- Allow the kettle to cool down fully and disconnect the
appliance from the mains electrical supply. Make sure
that your hands are clean and free from soap, cream or
anything which might taint the water.
- Empty the kettle and remove the lter as shown in g. 1.
Rinse under a tap whilst brushing with a soft brush (g. 2)
and replace the lter (g. 3).
Filter may pose suocation risk, do not let it
unattended after cleaning.
To clean the kettle and the scale lter
It is vital to clean and descale regularly in order to maintain
good working order. Excessive scale build-up may aect the
performance of the product and shall be avoided.
- Use descaler for kettles (tip: use citric-acid based descaling
solutions). When limescale starts forming on the heating
element, buy a suitable descaler for kettles and descale
according to the instructions given on the descaler pack.
- After descaling, boil repeatedly with fresh water and
rinse thoroughly to completely eliminate all residues of
descaler which could damage the appliance. Repeat the
boil and rinse steps for at least three times.
- If the lter requires descaling, remove and immerse in the
same descaling solution.
- Make sure electric parts are completely dry before using
the kettle.
TECHNICAL CHARACTERISTICS
Supply voltage See rating plate
Absorbed power “