Loading ...
Loading ...
Loading ...
4
5
Important!
Failure to observe the warning could result in injury or damage
to the appliance.
- Take care when pouring - do not over-tilt the kettle as
water may enter into the switch mechanism.
- Close supervision is necessary when any appliance is used
near children.
- Do not operate this kettle if the mains lead or plug
is damaged, if the kettle malfunctions, or has been
damaged in any manner.
It must be returned to an authorised service agent for
repair or replacement in order to avoid hazard.
Danger of burns!!
Failure to observe the warning could result in burns or scalds.
- Do not touch hot surfaces i.e. body or lid. Use handles or
knobs.
- Water can remain hot for a long time after boiling and can
present a scald hazard.
Keep the kettle and the mains lead away from the edge of
the work surface and out of the reach of children.
- Do not allow the mains lead to hang over the edge of the
table or work surface.
- Avoid contact with steam coming out of the spout when
pouring, and out of the lid or spout when relling.
- Never put the kettle, its base or cord near or on cooker, hot
plates or gas burners.
Please note:
This symbol indicates recommendations and important
information for the user.
- Remove the kettle from its power base before lling.
- Do not use the kettle for any purpose other than heating
water.
- De’Longhi will not accept any liability if the appliance is
subject to improper use, or failure to comply with these
instructions.
- Never use the kettle without its lid and lter (kettle may
not switch o).
- Position the kettle properly on the power base before
switching on.
This appliance conforms to EC Regulation 1935/2004
on materials and articles intended to come into contact
with food.
DESCRIPTION
A Removable lter
B Removable lid
C Kettle body
D Power-on indicator light
E 360° base with cord storage
F Plug
G ON/OFF switch
H Water level indicator
USE
Before use
- Remove all packaging from the kettle and power base.
- Do not let children play with them to avoid suocation
hazard.
- Remove any labels from the outer stainless steel surfaces.
- Remove the lter (g. 1) and wash with water (g. 2).
Refer to “Removing the scale lter”.
- Fill the kettle to ‘MAX’ level and boil.
- The boiled water should be discarded and the kettle
rinsed out with cold water. Repeat the boil and rinse steps
for at least three times to remove any manufacturing
dust, etc.
- After the kettle has been rinsed out, re-t the lter (g.
3).
In use
With the specially designed power base and central connector,
you can now set the kettle on the base at any angle, from any
position.
- Release cord from storage base and adjust length by
winding around the base to give the correct cord length
to reach the plug socket to be used (g. 4).
- Do not let cord hang over edge of table or counter, or
touch hot surfaces (for example the top B).
Filling
- Remove the kettle from the base unit before lling.
- Open lid and ll kettle to desired level.
Do not ll with less than 0.5 litres of water to
prevent the kettle running dry while operating; misuse
of this kind will shorten the life of the element. Do not
ll with more than 1.7 litres of water (up to the MAX
level). If the kettle is overlled, there is a risk that
boiling water may be ejected causing burns.
Switching on
- Plug the power base into the mains socket.
- Place kettle on power base.
- Press the ON/OFF switch down (g. 5) to switch the kettle
on.
Loading ...