Loading ...
Loading ...
Loading ...
7
ENGLISH
(Original instructions)
To empty the dust canister (Fig. F, G, H, I)
u Push down the dust canister release button (4) to
release and remove the dust canister (5) from the vacuum.
u Use your index nger and thumb to pinch the lter
housing tabs and pull the lter housing (6) from the
dust canister as shown in gure G.
u Place the dust canister over a trash can and empty the
dust canister as illustrated in gure H.
u Remove the foam lter (6a) from the lter housing as
shown in gure I.
u Shake or lightly brush any loose dust off of the foam
lter (6a) and lter (6).
u Rinse out the dust canister (5) with warm soapy water.
u Wash the lters with warm soapy water.
u Ensure the lters are completely dry before retting the
lters into the lter housing.
u Ret the clean and dry foam lter (6a) into the lter
housing (6).
u Install the lter housing into the dust canister (5).
u Install the dust canister onto the vacuum, until it “clicks”
rmly into position.
Removing and cleaning the beater bar
(Fig. J, K)
Warning! To reduce the risk of injury from moving parts,
disconnect the oor head and extension tube from the vacuum
before cleaning or servicing.
u To remove the beater bar (9b) from the oor head (9) Slide
the beater bar release button (9a) to the rear of the unit.
u The beater bar (9b) can now be removed and cleaned.
Safe storage (Fig. L)
The unit can be safely stored, when not in use, by placing the
catch on the rear of the motor unit onto the storage station
(13) as shown in gure L.
Wall mounteing
The product can be attached to a wall to provide a
convenient storage for the appliance.
When mounting to a wall, make sure the mounting method
is suitable for the wall type and is appropriate to the weight
of the appliance.
u Mark the location of the charging station screw holes on
the wall (within reach of an electrical outlet for charging
the vacuum while it is on the storage station.
u Fix the storage station to the wall using appropriate
screws and plugs for the type of wall, and weight of the
appliance.
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
u Run the battery down completely if it is integral and then
switch off.
u Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
u Regularly clean the ventilation slots in your appliance/
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Replacing the lters
The lters should be replaced every 6 to 9 months and when-
ever worn or damaged. Replacement lters are available from
your BLACK+DECKER dealer.
u Remove the old lters as described above.
u Fit the new lters as described above.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
BHFEA420J BHFEA515J BHFEA520J
Voltage 14.4v 18v 18v
Watt Hours 28.8Wh 27Wh 36Wh
Approx Charge Times 5 hours 4 hours 5 hours
Weight 2.56KG 2.61KG 2.62KG
Australia & New Zealand
Stanley Black & Decker
www.blackanddecker.com.au
www.blackanddecker.co.nz
Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ)
810 Whitehorse Road Box Hill VIC 3128, Australia
Loading ...