Black+Decker BHFEA515J-XE 2-in-1 Power Series Plus Stick Vacuum

User Manual - Transcript

• Page 4 - English - : ENGLISH Original instructions Intended use Your BLACKDECKER BHFEA420J BHFEA515J BHFEA520J cordless vacuum cleaners have been designed for vacuum cleaning purposes These appliances are intended for household use only Read all of this manual carefully before operating the appliance Safety instructions Warning Read all safety warnings and all instructions Failure to follow the warnings and instructions listed below may result in electric shock re andor serious injury u The intended use is described in this manual The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury u Retain this manual for future reference u This appliance contains batteries that are only replaceable by skilled persons Using your appliance u Do not use the appliance to pick up liquids or any materials that could catch re u Do not use without dust bag andor lters in place u Do not use the appliance near water u Do not immerse the appliance in water u Never pull the charger lead to disconnect the charger from the socket Keep the charger lead away from heat oil and sharp edges u This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance Cleaning and user maintenance shall not be made by children without supervision Inspection and repairs Before use check the appliance for damaged or defective parts Check for breakage of parts damage to switches and any other conditions that may affect its operation u Do not use the appliance if any part is damaged or defective u Have any damaged or defective parts repaired or replaced by an authorized repair agent u Regularly check the charger lead for damage Replace the charger if the lead is damaged or defective u Never attempt to remove or replace any parts other than those specied in this manual
• Page 5 - English - : ENGLISH Original instructions Additional safety instructions After use u Unplug the charger before cleaning the charger or charging base u When not in use the appliance should be stored in a dry place u Children should not have access to stored appliances Residual risks Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings These risks can arise from misuse prolonged use etc Even with the application of the relevant safety regulations and the implementa tion of safety devices certain residual risks can not be avoided These include u Injuries caused by touching any rotatingmoving parts u Injuries caused when changing any parts blades or accessories u Injuries caused by prolonged use of a tool When using any tool for prolonged periods ensure you take regular breaks u Impairment of hearing u Health hazards caused by breathing dust developed when using your tool example working with wood especially oak beech and MDF Chargers Your charger has been designed for a specic voltage Always check that the mains voltage corresponds to the voltage on the rating plate Warning Never attempt to replace the charger unit with a regular mains plug u Use your BLACKDECKER charger only to charge the battery in the appliance with which it was supplied Other batteries could burst causing personal injury and damage u Never attempt to charge non rechargeable batteries u If the supply cord is damaged it must be replaced by the manufacturer or an authorised BLACKDECKER Service Centre in order to avoid a hazard u Do not expose the charger to water u Do not open the charger u Do not probe the charger u The appliancebattery must be placed in a well ventilated area when charging Electrical safety Symbols on the charger Read all of this manual carefully before using the appliance This tool is double insulated therefore no earth wire is required Always check that the power supply corresponds to the voltage on the rating plate The charging base is intended for indoor use only Labels on appliance The following symbols appear on this appliance along with the date code Read all of this manual carefully before using the appliance use charger S010QS2300040 S010Q 23 S010QS2300040
• Page 6 - English - : ENGLISH Original instructions Features This tool includes some or all of the following features 1 Onoff power button 2 Charging port 3 State of charge indicator 4 Dust bowl relase button 5 Clear dust bowl 6 Cyclonic lter assembly 7 Extension pole release button 8 Extension pole 9 Floorhead with inbuilt oor sense 10 Beater bar release button 11 Crevice tool 12 Charger 13 Storage station Assembly Fig A u Align the top of the extension tube 8 with the vacuum inlet 7a as shown in Fig A u Push the extension tube 8 onto the vacuum inlet 7a so it locks into position u To remove an the extension tube press the extension tube release button 7 and gently pull the extension tube off Warning When not in use position the unit with the rear of the vacuum facing a wall so that any inadvertent fall of the unit would contact a wall and not people or pets Charging the battery Fig B Warning Use only with the supplied charger From new the rechargeable cells of the product need a minimum charge time of 5 hours to ensure full power u The unit must be turned Off in order to charge u Plug the jack plug 12a of the charger 12 into the charg ing port 2 of the vacuum u Plug the charger into a standard electrical outlet u While charging the charger may get warm this is perfectly normal and safe It is safe to leave the appliance connected to the charger indenitely The charger automatically reduces power consumption when charging is complete Warning Do not charge the battery at ambient temperatures below 4 C or above 40 C Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the instructions Charging improperly or at temperatures outside of the specified range may damage the battery and increase risk of fire State of charge indicator Fig C This appliance include a state of charge indicator 3 which consists of three LED lights that indicate the level of charge remaining in the battery This feature is only activated when the vacuum is powered on and when the vacuum is on charge The state of charge indicator is an indication of approximate levels of charge remaining in the battery pack The LED battery indicator displays the remaining charge and warns you when the battery is low The nal LED will ash continuously when there is only very little runtime remaining Note The state of charge indicator is only an indication of the charge left on the battery It does not indicate tool functionality and is subject to variation based on product components temperature and enduser application Use This vacuum cleaner can be used in one of two ways u With the extension tube 8 and the oor head 9 as u With the crevice tool 11 and the vacuum Mounting accessories Fig D u The crevice tool 11 allows for vacuuming in narrow and hard toreach places u To attach the crevice tool 11 press into vacuum inlet 7a so it locks into position as shown in gure D u To release the crevice tool 11 press the crevice tool release button 11a and gently pull the extension tube off Switching ON and OFF Fig E u To switch ON push the onoff power button 1 u For increased power push the OnOff button 1 again u Push the OnOff button 1 a third time to turn the unit off Note The state of charge indicator LEDs 3 will illuminate while the vacuum is ON u To switch OFF slide the onoff power switch 1 to the O position u Return the product to the charger immediately after use so that it will be ready and fully charged for the next use Ensure that the product is fully engaged with the charger plug Floorsense Floorsense is active in the low speed When a carpet is detected the performance of the unit is automatically increased to high speed When a hardoor is detected the performance of the unit reduces to low speed Cleaning and emptying the vacuum Warning ProjectileRespiratory Hazard Never use the vac without its filter Warning The filter is reusable do not confuse it with a disposable dust bag and do not throw it away when the product is emptied We recommend that you replace the filter every 69 months depending on frequency of use
• Page 7 - English - : ENGLISH Original instructions To empty the dust canister Fig F G H I u Push down the dust canister release button 4 to release and remove the dust canister 5 from the vacuum u Use your index nger and thumb to pinch the lter housing tabs and pull the lter housing 6 from the dust canister as shown in gure G u Place the dust canister over a trash can and empty the dust canister as illustrated in gure H u Remove the foam lter 6a from the lter housing as shown in gure I u Shake or lightly brush any loose dust off of the foam lter 6a and lter 6 u Rinse out the dust canister 5 with warm soapy water u Wash the lters with warm soapy water u Ensure the lters are completely dry before retting the lters into the lter housing u Ret the clean and dry foam lter 6a into the lter housing 6 u Install the lter housing into the dust canister 5 u Install the dust canister onto the vacuum until it clicks rmly into position Removing and cleaning the beater bar Fig J K Warning To reduce the risk of injury from moving parts disconnect the oor head and extension tube from the vacuum before cleaning or servicing u To remove the beater bar 9b from the oor head 9 Slide the beater bar release button 9a to the rear of the unit u The beater bar 9b can now be removed and cleaned Safe storage Fig L The unit can be safely stored when not in use by placing the catch on the rear of the motor unit onto the storage station 13 as shown in gure L Wall mounteing The product can be attached to a wall to provide a convenient storage for the appliance When mounting to a wall make sure the mounting method is suitable for the wall type and is appropriate to the weight of the appliance u Mark the location of the charging station screw holes on the wall within reach of an electrical outlet for charging the vacuum while it is on the storage station u Fix the storage station to the wall using appropriate screws and plugs for the type of wall and weight of the appliance Maintenance Your BLACKDECKER cordless appliance has been designed to operate over a long period of time with a minimum of main tenance Continuous satisfactory operation depends upon proper tool care and regular cleaning Warning Before performing any maintenance on cordless appliances u Run the battery down completely if it is integral and then switch off u Unplug the charger before cleaning it Your charger does not require any maintenance apart from regular cleaning u Regularly clean the ventilation slots in your appliance charger using a soft brush or dry cloth u Regularly clean the motor housing using a damp cloth Do not use any abrasive or solventbased cleaner Replacing the lters The lters should be replaced every 6 to 9 months and when ever worn or damaged Replacement lters are available from your BLACKDECKER dealer u Remove the old lters as described above u Fit the new lters as described above Protecting the environment Z Separate collection Products and batteries marked with this symbol must not be disposed of with normal household waste Products and batteries contain materials that can be recov ered or recycled reducing the demand for raw materials Please recycle electrical products and batteries according to local provisions Further information is available at www2helpUcom Technical Data BHFEA420J BHFEA515J BHFEA520J Voltage 144v 18v 18v Watt Hours 288Wh 27Wh 36Wh Approx Charge Times 5 hours 4 hours 5 hours Weight 256KG 261KG 262KG Australia amp New Zealand Stanley Black amp Decker wwwblackanddeckercomau wwwblackanddeckerconz Tel1800 338 002 Aust or Tel 0800 339 258 NZ 810 Whitehorse Road Box Hill VIC 3128 Australia