Majestic RUBY35IL User Manual

Loading ...

Majestic • RUBY25IN, RUBY25IL, RUBY30IN, RUBY30IL, RUBY35IN, RUBY35IL Owner’s Manual • 2542-981 Rev. D • 7/19

Removing Fixed Glass Assembly

WARNING! Risk of Asphyxiation! Handle xed glass

assembly with care. Inspect the gasket to ensure it is

undamaged and inspect the glass for cracks, chips or

scratches.

• DO NOT strike, slam or scratch glass.

• DO NOT operate replace with glass removed, cracked,

broken, or scratched.

• Replace as a complete assembly.

• The glass assembly fastens to the replace in four

places. The four fastening mechanisms are spring-

loaded glass latches. An example of the glass latch is

shown in Figure 4.2.

• To release glass assembly, use the supplied multi-

purpose tool. See Figure 4.1. While supporting the

glass assembly, pull the two bottom spring-loaded

latches forward and allow them to retract away from the

glass assembly. Tilt the bottom of the glass assembly

outward until the top latches disengage.

• Clean glass with a non-abrasive commercially available

cleaner.

- Light deposits: Use a soft cloth with soap and water.

- Heavy deposits: Use commercial fireplace glass

cleaner (consult with your dealer).

Figure 4.2 Fixed Glass Assembly

Figure 4.1 Multi-Purpose Tool

Replacing Fixed Glass Assembly

• Verify Glass Seal Plate is properly installed. See Figure

4.3.

WARNING! Glass seal plate must be properly installed.

Risk of elevated component temps and carbon monox-

ide exposure.

• Tilt the top of the glass assembly toward replace and

slide glass assembly upward to engage top latches.

Verify top latches are fully engaged and then fasten the

two bottom latches using the supplied mulit-purpose tool.

• Reinstall door or decorative front.

GLASS CLIPS

Figure 4.3 Glass Seal Plate

GLASS SEAL PLATE

GLASS SEAL

PLATE INSTALLED

Loading ...

Majestic RUBY35IL Ruby Series Direct Vent Liquid Propane Fireplace