Loading ...
Loading ...
Loading ...
52 English
Troubleshooting
Troubleshooting
Problem Action
Fills with the wrong
temperature water.
ŷ Fully open both water taps.
ŷ Make sure the temperature selection is correct.
ŷ Make sure the hoses are connected to the correct water taps.
Flush water lines.
ŷ Disconnect the hoses and clean the screens. The hose lter
screens may be clogged.
ŷ While the washing machine lls, the water temperature may
change as the automatic temperature control feature checks
incoming water temperature. This is normal.
ŷ While the washing machine lls, you may notice just hot and/
or just cold water going through the dispenser when cold or
warm temperatures are selected.
This is a normal function of the automatic temperature
control feature as the washing machine determines the water
temperature.
Door (Lid) locked or
will not open.
ŷ While the washing machine is operating, press or tap Start/
Pause to stop the washing machine.
ŷ It may take a few moments for the door lock mechanism to
disengage.
Does not drain and/
or spin.
ŷ Check the fuse or reset the circuit breaker.
ŷ Make sure the electrical voltage is normal.
ŷ Make sure the washing machine is plugged in.
ŷ Make sure the drain hose is pointed downward. (Natural drain
models only)
ŷ Make sure the drain hose is not clogged.
ŷ Make sure the drain hose is not kinked.
ŷ Straighten the drain hose. If there is a drain restriction, call for
service.
ŷ Close the door, and press or tap Start/Pause. For your safety,
the washing machine will not spin unless the door is closed.
Load is wet at the end
of the cycle.
ŷ Use the High or Extra High spin speed. (Applicable model
only)
ŷ Use high efciency (HE) detergent to reduce oversudsing.
ŷ Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
WA8700K_WA50K-03647A-03_EN.indd 52 2016/7/22 10:19:37
Loading ...
Loading ...
Loading ...