Loading ...
Loading ...
Loading ...
Timed Dry
Use this cycle to complete drying if items are still damp after a Sensor Cycle. Timed Dry is
also useful for drying heavyweight and bulky items, such as bedspreads, and work clothes.
I_ightweight garments, such as exercise wear, can be dried using Timed Dry on a low
temperature setting. Timed Dry can also be used with the drying rack.
Rapid Dry
Use this cycle for dying small loads that need short drying time.
Freshen Up
Use this cycle to help smooth out wrinkles from such items as clothes packed in suitcases or
items wrinkled from being [eft in the dryer to long.
Timed Preset Cycle Settings
Timed Cycles Default Default Time
Load Type Temperature (Minutes)
TIMED DrY High 40
Heavyweight, bulky items, work
clothes
RAPID DRY Regular 23
Small loads
FRESHEN UP Medium 20
Helps to smooth out wrinkles
Sensor Cycle Modifiers
Use the DRYNESS I_EVEI. button to select dryness levels for the Sensor Cycles. Press DRYNESS
I.EVEI. until the desired Dryness setting illuminates.
The preset dryness setting is Normal when a Sensor Cycle is selected. You can select a
different Dryness I_eve[, depending on your load, by pressing DRYNESS I_EVEI_and choosing
More, Normal, I_ess, or Damp. Selecting More, Normal, I.ess, or Damp automatically adjusts
the Dryness I_eve[ at which the dryer will shut off. Once a Dryness I.eve[ is set, it cannot be
changed without stopping the cycle.
The initial preset temperature is the preferred setting for drying clothes; however, if desired,
one alternate temperature may be selected to dry the load on a lower heat setting. Once the
alternate temperature has been selected, the next time the same cycle is selected, the
alternate temperature is remembered and displayed. The original (default) temperature may
be rese[ected. The Delicate cycle does not offer an alternate temperature.
I damp m less m normal ! more I dryness [
adjust sensor cycle only [ J
NOTE: Dryness I.eve[ selections cannot be used with the Timed Cycle.
Timed Cycle Modifiers
Use the TEMP I_EVEI_button to select temperatures for the Timed Cycles. Press TEMP I.EVEI....
until the desired temperature setting illuminates.
@airfluff @extra[ow@low @medium @regular
Air Fluff
Use the Air Fluff Modifier for items that require drying without heat such as rubbeb plastic,
and heat-sensitive fabrics. This table shows examples of items that can be dried using Air
Fluff.
Type of Load Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
O[efin, po[ypropy[ene, sheer nylon 10 - 20
*Reset cycle to complete drying, if needed.
When using Air Fluff
• Check that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during the cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Fluff is not available with Sensor Cycles.
You can customize your cycles by selecting options.
options
Wrinkle Prevent Setting
The Wrinkle Prevent setting helps keep wrinkles from forming when you cannot unload the
dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then
tumbles again for a brief period.
• Press WRINKI.E PREVENT setting to get up to 90 minutes of heat-free, periodic tumbling
at the end of a cycle.
• Stop the Wrinkle Prevent at any time by pressing WRINKI.E PREVENT setting or opening
the dryer door.
For the Wrinkle Control cycle, the Wrinkle Prevent setting is preset to ON. The other
Sensor Cycles will retain the Wrinkle Prevent setting. For example, if you select the
Wrinkle Prevent setting in the Normal cycle, the Wrinkle Prevent setting will be on the
next time you select the Normal cycle.
NOTE: If you do not select the Wrinkle Prevent setting, the dryer stops after cool down.
Loading ...
Loading ...
Loading ...