Loading ...
Loading ...
Loading ...
(HE(KINGYOURVENT
Your dryer must be properly installed and vented to achieve maximum drying efficiency and
shorten drying times, Use the minimum recommended installation clearances (found in your
Installation Instructions) to avoid blocking the flow of combustion and ventilation air. Install
your dryer in a well-ventilated room where the temperature is always above 45°F. Also make
sure that your dryer is leveled. Refer to your Installation Instructions for more
information.
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent,
Failure to follow these instructions can
result in desth or fire.
If the dryer is not properly installed and vented, itwill
not be covered under the warranty.
NOTE: Service calls caused by improper venting will
be paid for by the customer, whether it was a paid
installationor self-installed For paid installation,call
the company that installedthe vent for adjustment.
1. Do not use plastic vent or flexible metal foil vent.
Use 4 inch heavy metal
or flexible metal vent.
Do not kink or crush
flexible metal vent. It
must be completely
extended to allow
adequate exhaust air to
flow. Check vent after
installation. Refer to
your Installation
Instructions for proper
length requirements of vent.
2. Use a 4 inch exhaust hood. Smaller hoods
increase drying times.
3.The exhaust vent can be routed up, down, left,
right, or straight out the
back of the dryer. Space
re_luirements are listed
in your Installation
Instructions.
6
Loading ...
Loading ...
Loading ...