Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
COMMONDRYINGPROBLEMS
PROBLEM
Not drying
s_isfactodly
Dryer will
not run
CAUSE SOLUTION
• Lint screen is clogged with lint. • Clean lint screen.
• Restricted air movement.
Exhaust vent or outside
exhaust hood is clogged with
lint.
• Run dryer for 5-10 minutes. Hold hand under
outside exhaust hood to check air movement. If you
do not feel air moving, clean exhaust system of lint
or replace exhaust vent with heavy metal or flexible
metal vent (see your Installation Instructions).
• Exhaust vent iscrushed or
kinked.
• Replace with heavy metal or flexible metal vent
(see your Installation Instructions).
• One fuse is blown or circuit
breaker is tripped. The dryer
will appear to operate, but you
will not get any heat.
• Replace fuse or reset breaker.
• Cycle Control knob or temper- • Select the right cycle and temperature for the types
ature selector is set on air dry. of garments being dried (see "Using your Dryer").
• Load not contacting the sensor • Level dryer (see your Installation Instructions).
strips and automatic cycle
ending early.
• Fabric softener sheets blocking • Use only one softener sheet per load and only use
exhaust grill, it once.
• Dryer located in room with • Move dryer to a location with temperatures above
temperature below 45°F (7°(3). 45°F (7°(3).
• Large amount of moisture in
the load.
• Expect longer dry times with items that hold more
moisture (cottons).
• Cold rinse water used.
• Expect longer dry times.
• Load too large and bulky to
dry quickly.
• Separate load to tumble freely.
• Power cord not firmly plugged • Plug power cord into a live circuit.
into a live circuit with proper
voltage.
• Fuses blown or circuit
breakers tripped.
• Replace fuses or reset breakers.
• Using a regular fuse. • Replace with a time-delay fuse.
• Dryer door not firmly closed. • Close dryer door tightly.
• Start button not firmly pressed. • Press Start button again.
• Cycle Control knob set to Off. • Set knob to a cycle or time.
18
Loading ...
Loading ...
Loading ...