Loading ...
Loading ...
Loading ...
(290,1)
北米Model "A2620BE-C" EDITED: 2022/ 9/ 13
go directly to the HomeLink website.
Additional information and programming
videos can be found at
www.HomeLink.com/Subaru and
www.youtube.com/HomeLinkGentex.
CAUTION
. Before programming HomeLink
to a garage door opener or gate
operator, make sure that people
and objects are out of the way of
the device to prevent potential
harm or damage.
. When programming a garage
door opener, it is advised to park
outside of the garage.
. Do not use HomeLink with any
garage door opener that lacks
safety stop and reverse features,
as required by U.S. federal safety
standards (this includes any gar-
age door opener model manufac-
tured before April 1, 1982). A
garage door that cannot detect
an object signaling the door to
stop and reverse does not meet
current U.S. federal safety stan-
dards.
. It is also recommended that a new
battery be placed in the hand-
held remote (garage door opener
remote) of the device for quicker
and more accurate training.
. Some vehicles may require the
ignition switch to be turned to the
“ON” or “ACC” position for pro-
gramming and/or operation of
HomeLink.
. Keep the hand-held remote (gar-
age door opener remote) of the
device you are programming for
use in other vehicles as well as
for future HomeLink program-
ming. It is also suggested that
upon the sale of the vehicle, the
programmed HomeLink buttons
be erased for security purposes.
Refer to “Erasing HomeLink But-
tons” �P291.
! HomeLink set up
s03ap110801
1) HomeLink buttons
2) Left button
3) Center button
4) Right button
Press any of the left, center or right buttons
to display the main menu. Select
HomeLink menu using the left button or
press any of the HomeLink buttons.
NOTE
The main menu cannot be displayed on
the display while the select lever is in a
position other than the “P” position.
Mirrors
288
Loading ...
Loading ...
Loading ...