Subaru 2023 Outback Touring XT

User Manual - Page 265

For 2023 OUTBACK TOURING XT.

PDF File Manual, 616 pages, Read Online | Download pdf file

2023 OUTBACK TOURING XT photo
Loading ...
Loading ...
Loading ...
(261,1)
北米Model "A2620BE-C" EDITED: 2022/ 9/ 13
following operation is done.
. The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
. The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The low beam headlights will turn off under
any of the following conditions.
. 3 minutes have passed since the low
beam headlights were illuminated by the
welcome lighting function.
. 30 seconds have passed since the door
is opened and closed.*
1
. The light control switch is turned to a
position other than “AUTO”.
. The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
SUBARU dealer for details. Also, you can
change the setting by operating the center
information display. For details, refer to “Car
settings” P226 (11.6-inch display models)
or “Vehicle setting icons” P246 (dual 7.0-
inch display models).
! Sensor for the auto on/off head-
lights
s03ah0101
The sensor is on the instrument panel as
shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
& High/Low Beam Change
(Dimmer)
s03ah02
1) High beam
2) Low beam
While the light control switch is in the
or
position in a dark place, the
headlights will turn on.
When the headlights are on high beam, the
high beam indicator light
on the
combination meter is also on.
NOTE
While the light control switch is in the
position and the lever is the high
beam position, the high beam assist
function will be on standby.
CONTINUED
Light Control Switch
259
3
Instruments and Controls
Loading ...
Loading ...
Loading ...