Loading ...
Loading ...
Loading ...
8
MINUTES
Scale Removal directions:
Weekly Care And Cleaning
NOTE: All maintenance should be done in the kitchen or bathroom on a water resistant surface.
To properly clean your humidifier we recommend the process of scale removal and
disinfecting shown on pages 8 and 9 of this manual.
5. Place mist nozzle and tank cap in water tray area of base to soak.
6. Soak for 15-20 minutes.
7. Using a soft cloth, gently clean transducer area in base to remove mineral deposits.
8. Rinse water tray area of base, water tank, tank cap and mist nozzle until the smell of
solution is gone.
CAUTION: DO NOT IMMERSE BASE IN WATER
9. To clean the scent pad area, gently wipe out scent pad heater
area with a soft damp cloth. DO NOT USE VINEGAR OR BLEACH
SOLUTION TO CLEAN THIS AREA.
Follow with disinfecting directions on page 9
1.
CAUTION: ALWAYS TURN OFF THE POWER SWITCH AND DISCONNECT THE POWER CORD FROM
THE ELECTRICAL OUTLET BEFORE CLEANING.
2. Remove Water Tank and empty base of any water.
3. Remove mist nozzle and water tank cap and set aside.
4. Fill water tank from bottom and water tray area of base with 1 cup of distilled
white vinegar.
Step 2
Step 6
Step 1
Step 5
Step 3
Step 7 Step 8
Step 9
Step 4
1c
WARNING: DO NOT submerge base in water or any other liquids. Doing so will damage the humidifier.
CAUTION: If using accessories with your humidifier such as a demineralization cartridge
or Protec Cleaning Cartridge, remove these before cleaning and set aside.
These accessories cannot be cleaned. Doing so will damage the accessories.
Loading ...
Loading ...
Loading ...