Husqvarna MZ6128-966502301 Zero Turn Mower

Operator Manual - Page 36

For MZ6128-966502301. Also, The document are for others Husqvarna models: MZ6128- 96650230, MZ28ZTBF-96658250, FD52M-96658260, FD61M-96658270

PDF File Manual, 64 pages, Read Online | Download pdf file

MZ6128-966502301 photo
Loading ...
Loading ...
Loading ...
MAINTENANCE
Battery
Your mower is equipped with a maintenance free
battery and does not need sere'icing However,
periodic charging of the battery with an automotive
type battery charger wilt extend its life.,
_' Keep battery and terminals ctean
e Keep battery bolts tight
o See chart for charging times
WARNING!
Always wear eye protection when
around batteries,
Cleaning battery and terminals
Corrosion and dirt on the battery and terminals can
cause the battery to "leak" power.,
1 Open the terminal access doors
2 Disconnect BLACK battery cable first, then the
RED battery cable and remove the battery from
the machine
3 Rinse the battery with plain water and dry
4 Clean terminals and battery cable ends with wire
brush until shiny,
5 Coat terminals with grease or petroleum jelly
6 Reinstall battery,
Replacing battery
I, Lift seat and rotate forward,
2, Open terminal access doors
3, Using two 1/2"wrenches disconnect BLACK battery
cable then RED battery cable.
4 Using a 7/,6wrench, remove the bolts on either
side of the terminal guard and lift off guard
5, Carefully remove the battery from the mower.
6. Install new battery with terminals in the same
position as the old battery
7,. Reinstall battery terminal guard,,
8 First connect RED battery cable to positive (+)
battery terminal with hex bolt and hex nut
9, Connect BLACK grounding cable to negative (-)
battery terminal with remaining hex bolt and hex
nut.,
10, Close access doors.
11. Lower seat.
IMPORTANT INFORMATION
Do not attempt to open or remove caps or
covers. Adding or checking level of electrolyte
is not necessary.
Always use two wrenches for the terminal
screws.
A WARNING!
Do not short battery terminals by
allowing a wrench or any other
object to contact both terminals at
the same time. Before connecting
battery, remove metal bracelets,
wristwatch bands_ rings, etc.
Positive terminal must be connected
first to prevent sparks from
accidental grounding.
CZ_2,2
1,Terminalguard
2, Access doors
Batterycleaningand installation
36
Loading ...
Loading ...
Loading ...