Loading ...
Loading ...
Loading ...
36
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM
CAUSE CORRECTION
Loss of drive
1 Freewheel control in
“DISENGAGED” position.
1 Place freewheel control in
“ENGAGED” position.
2 Debris on steering plate (if
equipped).
2 See "CLEANING" in the
maintenance section.
3 Motion drive belt worn, damaged,
or broken.
3 Replace motion drive belt.
4 Air trapped in transmission during
shipment or servicing.
4 Purge transmission.
5 Axle key missing. 5 Install axle key at rear wheel. See
"TO REMOVE WHEEL" in the
Service and Adjustments section.
Engine “backfires”
when turning
engine “OFF”
1 Engine throttle control not set
between half and full speed (fast)
position before stopping engine.
1 Move throttle control between
half and full speed (fast) position
before stopping engine.
Engine dies when
tractor is shifted
into reverse
1 Reverse operation system (ROS)
is not “ON” while mower or other
attachment is engaged.
1 Turn ignition key to ROS “ON”
position. See Operation section.
Loading ...
Loading ...
Loading ...