Loading ...
Loading ...
Loading ...
Care and Cleaning
Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage,
lay the door flat with the inside of the door facing down.
To remove the oven door:
1. Open oven door completely, horizontal with floor (See
Figure 44).
2. Pull the door hinge locks on both left and right door hinges
down from the oven frame completely toward the oven
door (See Figure 45). A tool such as a small flat-blade
screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (See Figure 46).
4.
5.
Close the door to 10 degrees from the door frame (See
Figure 46).
Lift the oven door hinge arms over the roller pins located on
each side of the oven frame (See Figure 46).
To replace oven door:
1. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (See Figure 46).
2.
Holding the oven door at the same angle as the removal
position (See Figure 46), seat the hook of the hinge arm
over the roller pins located on each side of the oven door
frame (See Figure 47). The hook of the hinge arms must be
fully seated onto the roller pins.
3. Fully open the oven door, horizontal with floor (See
Figure 44).
4. Push the door hinge locks up toward and into the oven
frame on both left and right oven door hinges to the locked
position (See Figure 45).
5. Close the oven door.
Figure 44: Door hinge location
!
Figure 45: Door hinge locks
oven
door -
Oven door
hinge
locations
Important:
Special Door Care Instructions - Most oven doors contain glass
that can break. Do not close the oven door until all the oven
racks are fully in place. Do not hit the glass with pots, pans, or
any other object. Scratching, hitting, jarring, or stressing the
glass may weaken its structure causing an increased risk of
breakage at a later time.
Figure 46: Holding door for removal
roller
pin
hinge
arm
Figure 47: Location of hinge arm and roller pin
Removing and Replacing the Warmer Drawer
38
Loading ...
Loading ...
Loading ...