Loading ...
Loading ...
Loading ...
5.
UVIOOA ULTRAVIOLET SYSTEM
If you have a SnapLamp TM handle, follow steps 5 and 6; otherwise, proceed to
step 7. Grasp the SnapLamp TM handle in one hand and the lamp glass in the
other and pull straight apart. See Fig. 10.
6.
)
M22852
Fig. 10. Disconnect lamp glass from SnapLamp TM handle.
Insert the new tamp glass into the SnapLamp TM handle by aligning the key and
pushing straight together. See Fig. 11.
J
M22854
Fig. 11. Replace lamp glass in SnapLamp TM handle.
7. Insert the bulb into the base with the tamp light indicator at the eleven o'clock
position. Continue pushing and gently rotating counterclockwise until the lamp
handle inserts fully into the base. See Fig 8.
8. Rotate the lamp clockwise until it snaps into place with the tamp light indicator
aligned with the raised button on the unit cover. See Fig. 9.
9. Reconnect power to your UV System.
10. Verify that your ultraviolet bulb is operating by viewing only through the lamp
light indicator on the lamp handle. Never look directly at your bulb while
illuminated.
11. Reconnect power to your heating and cooling system.
11 69-13814
Loading ...