Loading ...
Loading ...
Loading ...
48 TROUBLESHOOTING
Clicking The defrost control will click when the Normal Operation
Rattling Normal Operation
Floor is weak or uneven or leveling legs need to be
adjusted. See the Door Alignment section.
Normal Operation
Whooshing Normal Operation
Normal Operation
Gurgling Normal Operation
Popping Normal Operation
Sizzling Normal Operation
Vibrating To eliminate the noise, make sure that the sides and
back cannot vibrate against any wall or cabinet.
Normal Operation
Normal Operation
Dripping
Pulsating or High-Pitched
Sound
automatic defrost cycle begins and ends.
The thermostat control (or refrigerator
control on some models) will also click when
cycling on and off.
Rattling noises may come from the flow of
refrigerant, the water line on the back of the
unit, or items stored on top of or around the
refrigerator.
Refrigerator is not resting solidly on the floor.
Refrigerator with linear compressor was
jarred while running.
Evaporator fan motor is circulating air
through the refrigerator and freezer
compartments.
Air is being forced over the condenser by
the condenser fan.
Refrigerant flowing through the cooling
system.
Contraction and expansion of the inside
walls due to changes in temperature.
Water dripping on the defrost heater during
a defrost cycle.
If the side or back of the refrigerator is
touching a cabinet or wall, some of the
normal vibrations may make an audible
sound.
Water running into the drain pan during the
defrost cycle.
Your refrigerator is designed to run more
efficiently to keep your food items at the
desired temperature. The high efficiency
compressor may cause your new refrigerator
to run longer than your old one, but it is still
more energy efficient than previous models.
While the refrigerator is running, it is normal
to hear a pulsating or high-pitched sound.
Loading ...
Loading ...
Loading ...