Loading ...
Loading ...
Loading ...
10
* Installing Stainless Steel Handle
This wine cooler includes a stainless steel handle that is required to operate this unit. To install the
handle please follow the below instruction:
Pull away the door gasket in the area where the handle is to be installed you can see two designated
holes for handle installation. The gasket is easily displaced by hand, no tools are necessary.
Install the handle tightly as shown below with the two screws. Lock washers and flat washers provided.
(DO NOT over tighten as this will cause damage to the handle assembly and stainless steel surface of
glass door).
Replace the door gasket to its original position.
*Power Failures and Operation Anomalies
In the event of a power interruption, all previous temperature settings are automatically erased and it
will revert to a preset temperature setting. Most power failures are corrected within a short period of
time. An hour or twos loss of power will not affect your wine coolers temperatures. To avoid sudden
change of temperature while the power is off, you should avoid opening the door. For longer period of
power failure, do take steps to protect your wine.
Note: Irrespective of the cause, if you notice either abnormal temperature or humidity levels
inside your wine cooler, be reassured that only long and frequent exposure to these abnormal
conditions can cause a detrimental effect on your wines.
Ensure that there is power to the electrical supply plug by connecting another electrical appliance to it.
Check Fuse, if any. Make sure that the door is closed properly.
If your wine cooler appears to be malfunctioning, unplug it and contact EURO after sales service on
1800 440 335. Any intervention on the cold circuit should be performed by a refrigeration technician
who should carry out an inspection of the circuit sealing system. Similarly, any intervention on the
electrical circuit should be performed by a qualified electrician.
Noted: Any Intervention performed by a non-technician will lead to the warranty being
considered as null and void.
Loading ...
Loading ...