Loading ...
Loading ...
Loading ...
Cleaning and maintenance
49
EN
Removing and installing the door seal
(not on pyrolytic models)
To remove the seal:
• Release the hooks in the 4 corners and in
the centre and pull the seal outwards.
To install the seal:
• Attach the hooks in the 4 corners and in
the centre of the seal.
Seal maintenance recommendations
The seals should be soft and flexible.
• To keep the seal clean, wash it using a
non-abrasive sponge and lukewarm
water.
What to do if...
The appliance does not work:
• The switch is faulty: check the fuse box
and check to see whether the switch is in
working order.
• Loss of power: check that the indicator
lights of the appliance are working.
The gas burner does not light:
• Loss of power or igniters damp: light the
gas burner with a match or cigarette
lighter.
The oven does not heat up:
• Faulty fuse: check and, if necessary,
replace the switch.
• The function knob has not been set: set
the function knob.
• Check whether it has been set in
“showroom” mode (for further details see
“Secondary menu”).
All food prepared in the oven cavity burns
within a very short time:
• Faulty thermostat: contact an Authorised
Service Centre.
The door glass mists up when the oven is
hot:
• This is completely normal and is caused
by the difference in temperature. It does
not affect the performance of the oven.
Loading ...
Loading ...
Loading ...