Loading ...
Loading ...
Loading ...
4 5
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Ceramic Oscillating Heater
• Carefully read all instructions before operating the
Heater and save for future reference.
• Remove any packaging material and promotional
stickers before using the heater for the first time.
• Connect only to 230V or 240V power outlet.
• Avoid touching heater body while it is on, some
parts of the heater are hot. When moving the unit
switch off and hold the Heater by the handles
where provided.
• Keep combustible materials such as drapes and
other furnishings at least 1.7 metres from the front,
sides and rear of the heater. Do not use heater to
dry your laundry.
• Extreme caution and supervision is necessary
when this heater is used by or near children,
invalids or animals.
• Children should be supervised to ensure that they
do not play with the heater.
WARNING: In order to
avoid overheating, do
not cover the heater.
IMPORTANT: This heater
is intended for floor use
only. Do not mount on
ceiling or walls.
• Do not operate the heater on an incline plane. Do
not leave while the heater is switched on.
• Do not leave heater unattended. Always switch
off the heater at the controls and at the power
outlet then unplug heater from the power outlet
when not in use.
• Do not operate heater whilst asleep.
• Do not operate any heater with a damaged
cord or plug, or if heater has been dropped or
damaged in any manner. Return heater to your
nearest Kambrook service centre for examination,
electrical or mechanical adjustment or repair.
• Do not operate the heater with the power cord
damaged, frayed or split, wound around any part
of the heater, or in contact with heated surfaces
of the heater.
• Do not run the cord under carpeting or cover the
cord with rugs, runners or the like. Arrange cord
away from traffic areas and where it will not be
tripped over.
• Do not locate the heater immediately below a
socket outlet when in use.
• Do not use this heater with a programmer, timer
or any other device that switches the heater
on automatically since a fire risk may exist if the
heater is covered or positioned incorrectly.
• This heater is not intended for use in wet or moist
locations. Do not use this heater in the immediate
surroundings of a bath, a shower or a swimming
pool. Do not immerse or allow liquids to be spilt
on heater.
• Do not use the heater to dry your laundry.
• This heater has hot and arcing or sparking parts
inside. Do not use in areas where petrol, paints,
aerosols, or other inflammable substances are
used or stored.
• Do not allow materials that have been in contact
with oil, petroleum based products or drying fluids
to come in contact with the heater.
• To disconnect heater switch the power On/Off
switch to OFF, then switch off at the power outlet
then remove plug from its outlet.
• Do not insert or allow foreign objects to pass
through the inlet or outlet openings. This may
cause an electric shock, fire or damage
the heater.
• To prevent a possible fire or heat damage, allow
ample space around the heater (at 1.7m at front
and 0.5m at the rear, top and sides) and do not
totally or partially block the air inlet or outlets
in any manner. Check the openings from time
to time for accumulated dust. Ensure long shag
carpet does not obstruct airflow under the unit.
• Do not touch hot metal surfaces.
• Switch off at the power On/Off switch and power
outlet, then unplug and allow heater to cool down
before cleaning or storing.
• Do not use outdoors. This heater is not intended for
commercial use such as construction sites.
• Use this heater only as described in this instruction
manual. Any other use not recommended by the
manufacture may cause fire electric shock or
injury and voids all warranties.
• Regularly inspect the supply cord, plug, control
settings, air inlets and outlets and main housing
for any damage. If found damaged in any way,
immediately cease use of the heater and return
to Kambrook or an authorised service agent for
inspection or repair.
NOTE: This Kambrook Ceramic
Heater is electronically
controlled and will not operate
until the heater is plugged into
a 230V or 240V power point and
switched on.
Important Safeguards For All Electrical
Appliances
• Carefully read all instructions before operating the
appliance and save for future reference.
• Remove and safely discard all packaging
material and promotional labels before using the
appliance for the first time.
• Fully unwind the power cord before use.
• Do not let the power cord hang over the edge of
a bench or table, touch hot surfaces or become
knotted.
• To protect against electric shock, do not immerse
the power cord, power plug or appliance in water
or any other liquid, unless it is recommended in the
cleaning instructions.
• The appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance, by a person responsible for their safety.
• Children should be supervised to ensure that they
do not play with the appliance.
• It is recommended to inspect the appliance
regularly. Do not use the appliance if the power
supply cord, plug, connector or appliance
becomes damaged in anyway. Return the entire
appliance to the nearest authorised Kambrook
Service Centre for examination and/or repair.
• Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
• This appliance is for household use only. Do not use
this appliance for other than its intended use. Do
not use in moving vehicles or boats.
Do not use outdoors. Misuse may cause injury.
• The installation of a residual current device (safety
switch) is recommended to provide additional safety
protection when using electrical appliances. It is
advisable that a safety switch with a rated residual
operating current not exceeding 30mA be installed
in the electrical circuit supplying the appliance. See
your electrician for professional advice
• Always turn the appliance to the OFF position,
switch off at the power outlet and unplug at the
power outlet when the appliance is not in use.
• Before cleaning, always turn the appliance to the
OFF position, switch off at the power outlet, unplug
at the power outlet and remove the power cord,
if detachable, from the appliance and allow all
parts to cool.
• Do not place this appliance on or near a heat
source, such as hot plate, oven or heaters.
• Position the appliance at a minimum distance
of 20cm away from walls, curtains and other
heat or steam sensitive materials and provide
adequate space above and on all sides for air
circulation.
Loading ...
Loading ...
Loading ...