Loading ...
Loading ...
Loading ...
,, ASSEMBLY
S
.Figure2.13. Attachthrottle cable withplas-
tic ties (S). Attachwheel gear cable with
plastic ties (U).
STEP7:CheckAirPressurein
Tires
Use an automotive-type tire pressure
gauge to check the air pressure in
both tires. Deflate or inflate both
tires evenly from 15-to-20 PSI
(pounds per square inch). Be sure
that both tires have the same air
pressure or the unit witl pull to one
side.
STEP8 : CheckHardwarefor
Tightness
Inspect the hardware on the unit and
tighten any loose screws, bolts and
nuts.
Figure2-14: Attachwheelgearlever.
IMPORTANT" Motor oil must be
added to the engine crankcase
before the engine is started.
Follow the instructions in the
"Operation" section.
CAUTION
Unit is shipped without oil in
engine crankcase. DO NOT
start engine until oll has been
added. Severe engine damage
will result if this instruction is
net followed. See "Operation"
Section in this manual for oil
filling procedure.
11
Loading ...
Loading ...
Loading ...