Loading ...
Loading ...
Loading ...
English - 62
Troubleshooting
PROBLEM SOLUTION
Shuts o before the load is
dry
• The dryer load is too small. Add more items or a few towels and
restart the cycle.
• The dryer load is too large. Remove some items and restart the
dryer.
Lint on clothes • Make sure the lint fi lter is cleaned before every load. With some
loads that produce high amounts of lint, it may be necessary to clean
the fi lter during the cycle.
• Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trappers(for example, a pair of black linen pants).
• Divide larger loads into smaller loads for drying.
• Check pockets thoroughly before washing and drying clothes.
Garments still wrinkled after
Wrinkle-Care
• Small loads of 1 to 4 items work best.
• Load fewer garments.
• Load similar-type garments.
Odors remain in clothing
after Refresh.
• Fabrics having strong odors should be washed in a normal cycle.
Water drips from the nozzle
when Steam-Care starts
• This is steam condensation. The dripping water will stop after a short
time.
Sprayed water is not visible
during Steam-Care
• Sprayed water is di cult to see when the door is closed.
INFORMATION CODES
Samsung’s Smart Care, an automatic error-monitoring
system, detects and diagnoses problems at an early stage
and provides a quick and easy solution through LCD
navigation.
When your dryer has a problem, the notifi cation screen
will show the information and solution to help you better
understand what is occurring with your dryer and how to
solve the problem.
Information codes may be displayed to help you better understand what is occurring with your Dryer.
ERROR DISPLAY TRIGGER ACTION TAKEN
tE
The thermistor resistance is very
low or high.
Clean the screen or vent.
If the problem continues, call for service.
tE3
The resistance of the thermistor
for the vent blockage detection is
very low or very high.
Clean the screen or vent
If the problem continues, call for service.
HE
Invalid heating Temp in running
the dryer
Call for service.
dE Running the dryer with door open
Clean the door and then restart.
If the problem continues, call for service.
DV457E(G)_02836E-08_EN.indd Sec6:62DV457E(G)_02836E-08_EN.indd Sec6:62 2014-04-28 6:13:252014-04-28 6:13:25
Loading ...
Loading ...
Loading ...