11.1 DISPOSAL
- At the end of the machine’s working life, or
when it can no longer be repaired, ensure
that it is disposed of according to national
regulations.
- Contact your local authority for details of
collection schemes in your area.
In all circumstances:
• Do not dispose of power tools with domestic
waste.
• Do not incinerate.
• Do not abandon in the environment.
• Do not dispose of WEEE* as
unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
36748
MECHANICAL
WATER TIMER
These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the
life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling,
operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designllowing all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together with longer life of
the product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy of
continuous improvement determines the right to make modifications without prior warning.
1. TITLE PAGE 2. WARRANTY
1.1 INTRODUCTION:
USER MANUAL FOR:
MECHANICAL WATER TIMER
Stock no. 36748 Part no. WTM1
1.2 REVISIONS:
4. TECHNICAL DESCRIPTION
3. INTRODUCTION
5. IMPORTANT
11. DISPOSAL
- Recommended Water Pressure: 0.5 – 12
bar. In higher pressure areas, use a
pressure reducer.
- Recommended Operating Temperature: 4°
to 60°. It is recommended to remove the
timer from the tap during colder months and
when temperatures drop below 4°. The
timer should not be subjected to freezing
temperatures or frost.
- Recommended Water Source: Use cold
mains water only. If you are using a gravity
fed watering system, ensure that you use a
tap filter. Do not use any bore or unfiltered
water. Do not use any kind of pump to draw
water. Do not use if the water supply is
unstable. Do not use any liquids other than
water.
6. INSTALLATION
- The Draper Water Timer is best suited to a
cold mains fed system.
- The timer connects to the tap using the 1"
connector or ¾" reducer supplied.
- Using a hose connector (not supplied),
connect the hose directly to the timers, ½"
connector.
- Set the required watering time on the dial
before timing the water on.
7. GET STARTED
This mechanical timer is very easy to use. It
functions like an egg timer allowing you to set a
watering time of up to 120 minutes. If you just
want regular water flow from the tap, turn the
dial to MANUAL and water will flow freely.
8. WATER WITHOUT
TIMING
(Turn water on and off without having to
remove timer from the tap)
- Turn the dial anti-clockwise to MANUAL to
turn on the water flow.
- To stop water flow, turn the dial clockwise to
‘0’
9. SET A WATERING TIME
(Ideal for use with sprinklers and other watering
systems)
- IMPORTANT: Make sure your
sprinkler/watering system is set up correctly
before continuing. As soon as the dial is
turned, the valve opens allowing water to
flow. It is recommended to set the timer first
and then turn on the tap.
- Turn the dial clockwise so the arrow on the
dial points to the desired watering time.
Watering will begin immediately.
- When the timer reaches ‘0’, the valve will
close automatically and stop the flow of
water.
10. TIMER CARE &
MAINTENANCE
- Keep clear of any dirt or debris which may
block the valve and cause the timer to
malfunction.
- Disassembling the timer improperly will void
all warranties.
As our user manuals are continually updated, users should
make sure that they use the very latest version.
Downloads are available from:
http://www.drapertools.com/manuals.pgm
DRAPER TOOLS LIMITED, HURSLEY ROAD,
CHANDLER’S FORD, EASTLEIGH, HAMPSHIRE, SO53
1YF, UK
WEBSITE: drapertools.com
PRODUCT HELPLINE: +44 (0) 23 8049 4344
GENERAL FAX: +44 (0) 23 8026 0784
1.3 UNDERSTANDING THIS
MANUALS SAFETY CONTENT:
WARNING! Information that draws attention to the risk of
injury or death.
CAUTION! Information that draws attention to the risk of
damage to the product or surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited. Permission is granted to
reproduce this publication for personal & educational use only.
Commercial copying, redistribution, hiring or lending is
prohibited. No part of this publication may be stored in a
retrieval system or transmitted in any other form or means
without written permission from Draper Tools Limited. In all
cases this copyright notice must remain intact.
Date first published August 2019
2.1 WARRANTY
Draper tools have been carefully tested and inspected
before shipment and are guaranteed to be free from
defective materials and workmanship.
Should the tool develop a fault, please return the
complete tool to your nearest distributor or contact
Draper Tools Limited, Chandler's Ford, Eastleigh,
Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product
Help Line (023) 8049 4344.
A proof of purchase must be provided with the tool.
If upon inspection it is found that the fault occurring is
due to defective materials or workmanship, repairs will
be carried out free of charge. This warranty period
covering labour is 12 months from the date of purchase
except where tools are hired out when the warranty
period is 90 days from the date of purchase. The
warranty is extended to 24 months for parts only. This
warranty does not apply to any consumable parts, any
type of battery or normal wear and tear, nor does it
cover any damage caused by misuse, careless or
unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the
authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of
warranty, repairs and carriage charges will be quoted
and made accordingly.
This warranty applies in lieu of any other warranty
expressed or implied and variations of its terms are not
authorised.
Your Draper warranty is not effective unless you can
produce upon request a dated receipt or invoice to
verify your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit
and does not affect your statutory rights.
Draper Tools Limited.
Note: This tool is intended for domestic use only.
3.1 SCOPE
This timer allows setting watering time easy
dial with manual on/off and clear digital display
3.2 SPECIFICATION
Stock No................................................ 36748
Part No. ................................................ WTM1
Inlet................................ 1"BSP Female with a
............ ¾"BSP female adaptor ring with filter.
Outlet.......................... ¾" BSP Male with a ½"
............................................... hose connector
3.3 HANDLING & STORAGE
Do not drop this machine.
Store out of the reach of children.
(1) Dial
(2) Water inlet
(3) Water outlet
(1)
(2)
(3)
