Loading ...
Loading ...
Loading ...
Cover of battery box
Remove
Reinstall
battery
Remote control
10
When should the batteries be
replaced
To replace batteries
Remote control instructions
1. There is not a "beep" anymore
from the indoor unit when using the
control remote or the signal light
indicator does not light.
2. The indoor unit does not respond
to the remote control commands to
activate the programs.
1. Slide out the battery compartment
cover ( located at the front of the
remote control).
2. Install two AAA batteries in
the compartment (indicated in
the drawing located inside the
compartment).
3. Slide on the battery component
cover.
4. If the remote control is not operated
for long period of times, batteries
should be discarded.
1. The signal reach distance of the
remote control to the receiver that
is inside the indoor unit of the
air conditioner is 32 feet. Any
obstruction placed between the
receiver and the remote control
can cause interference, limiting the
capacity of the programming.
2. Any time when a button is pressed
on the remote control, the air
conditioner emits a "beep" that
indicates that a command has been
received and transmitted to the
indoor unit.
3. When selecting the function of timer,
the remote control (automatically)
sends a signal to the indoor unit at
the specific period. If the remote
control is left in a position that the
signal is blocked, a 15 minute
delay can be produced.
1. When replacing batteries, do not
use old batteries or a different
type battery. This may cause the
remote control to malfunction.
2. If you do not use the remote
controller for several weeks,
remove the batteries. Otherwise
battery leakage may damage
the remote controller.
3. The average battery life under
normal use is about 6 months.
4. Replace the batteries when there
is no answering beep from the
indoor unit or if the transmission
indicator fails to light.
Attention!!
Loading ...
Loading ...
Loading ...