Loading ...
Loading ...
Loading ...
INSTALLATIONREQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
• Phillips screwdriver • Tape measure
• Scissors • Cordless drill and 1/8"bit
• Level • Pencil
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
Parts supplied
Check that all parts are included in parts package.
B
A
A. Cabinet louvers
A. Foam seal with adhesive
strip
B. Foam seal without
adhesive strip
C. Window lock bracket
D. Side bracket (on some
models)
E. %" screws (4) (6300 and 8k models only)
F _" screws (5) (6 providedon lOkand 12k
models)
G. Side curtains (2)
H. Top channel seal (on some models)
I. Top channel (on some models)
Window installation
Window Opening Measurements--Small Chassis:
6300 Btu and 8000 Btu:
• 21" (53.3 cm) minimum to 331/2" (85 cm) maximum opening
width.
• 131/2" (34.3 cm) minimum opening height
Window Opening Measurements-- Large Chassis" 1Ok and
12k Btu
• 24" (61 cm) minimum to 36" (91.4 cm) maximum opening
width.
• 15" (38.1 cm) minimum opening height.
:_,IR()II{ II
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
• Grounded electrical outlet within 6 ft (183 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
• Free movement of air in room to be cooled.
• A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
• Adequate wall support for weight of air conditioner. Air
conditioner weighs 50 Ibs to 75 Ibs (22.7 kg to 34 kg).
B
) I
'v
L
l I
A. Small chassis: 21" (53.3 cm) minimum;
Large chassis: 24" (61 cm) minimum
B. Small chassis: 13½" (34.3 cm) minimum;
Large chassis: 15" (38.1 cm)minimum
Loading ...
Loading ...
Loading ...