Loading ...
Loading ...
Loading ...
installation 13
Check for water leaks at all water connection points in the
first 2 to 3 hours after installation, and correct it in case of
anywaterleak.Recheckafter24hours;ifleakstilloccurs,
it is recommended to contact a licensed plumber for advice.
INSTALLATION
Water is to be connected as per diagram below.
sink
brackets
mains
water
inlet
kitchen
cupboard
½" tap
fitting
filter
Step 1.
Ensure that the Ice Maker is switched OFF.
Icemaker off
hold off
freezer
temp
fridge
temp.
eco/
holiday
quick
freeze
display
lock
drinks
chill
Step 2.
Disconnect refrigerator from power supply.
Step 3.
Connect tap fitting to water supply tap. Tap must be close
to the refrigerator.
Step 4.
Install brackets for filter within 1 metre of tap.
WARNING
Do not screw the brackets into the refrigerator as this
may void your warranty and permanently damage
the refrigerator.
Step 5.
Write date on filter. The filter will need to be replaced
every 12 months.
date fitted 1
Step 6.
Extend the red collar and clip a circlip around the collar
at both ends of the filter.
Step 7.
Fit filter to brackets with water flow arrow pointing up.
water
flow
direction
INSTALLING YOUR ICE & WATER FILTER
Loading ...
Loading ...
Loading ...