Loading ...
Loading ...
Loading ...
420 SERVICING AND MAINTENANCE
2. With suitable tool fully loosen (four) fasteners
on the engine air cleaner filter cover.
3. Remove the engine air cleaner filter cover from
the engine air cleaner filter assembly.
Engine Air Cleaner Filter Assembly
4. Remove the engine air cleaner filter from the
vehicle.
Engine Air Cleaner Filter
Engine Air Cleaner Filter Installation
NOTE:
Inspect and clean the housing if dirt or debris is
present before replacing the engine air cleaner
filter.
1. Install the engine air cleaner filter onto the
engine air cleaner filter assembly.
2. Install the engine air cleaner filter cover onto
the engine air cleaner filter assembly.
3. Tighten the fasteners (four) on the engine air
cleaner filter assembly.
4. Install the engine cover.
G/T AIR FILTER MAINTENANCE
Clean Engine Air Filter
The scheduled air filter cleaning interval is
30,000 miles (48,280 km), or if in a dusty
environment the engine air filter should be
checked periodically to ensure optimal air flow.
1. Spray the air filter with the recommended
Mopar® air filter cleaner or apply mild
dishwashing detergent and water and let sit
for at least 10 minutes to loosen dirt before
rinsing.
NOTE:
Never use strong detergents, high pressure, or
gasoline on the air filter.
2. Rinse the air filter with cool low-pressure water
applied from the inside (clean side) out in
order to flush the dirt out of the filter. Continue
to rinse the filter until all traces of the cleaner
have been removed.
NOTE:
It may be necessary to repeat steps 1 and 2 if the
air filter is not completely clean.
3. After rinsing the air filter, gently shake off the
excess water and allow air filter to dry
naturally.
NOTE:
Do not use forced air pressure as it may damage
the filtering capabilities of the filter’s microfibers
and also void its warranty.
1 — Engine Air Cleaner Filter Fasteners
2 — Engine Air Cleaner Filter Cover
1 — Engine Air Cleaner Filter
22_DT_OM_EN_USC_t.book Page 420
Loading ...
Loading ...
Loading ...