Loading ...
Loading ...
Loading ...
390 IN CASE OF EMERGENCY
4. Placement for the front and rear jacking
locations are critical. See the following images
for proper jacking locations.
Jack / Extensions Placement
Front Jacking Location
When changing a front wheel, place the scis-
sor jack under the rear portion of the lower
control arm as shown. Access the front jacking
location from behind the front tire.
Front Lifting Point
Front Jacking Location
Rear Jacking Location
Operate the jack using the extension with jack
hook and the lug wrench. The extension tubes
may be used but are not required.
When changing a rear wheel, assemble the ex-
tension with jack hook to the jack and connect
the extension tubes. Access the rear jacking lo-
cation from behind the rear tire. Place the jack
under the Jack Lifting Point located on the rear
axle lower control arm bracket. Then locate the
slot in the jack lift plate onto the rear axle Jack
Lifting Point. Attach the extension with jack
hook extending to the rear of the vehicle.
Rear Lifting Point
22_DT_OM_EN_USC_t.book Page 390
Loading ...
Loading ...
Loading ...