Loading ...
Loading ...
Loading ...
P
I
WARNiNG ......................
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the unit.
Failure to do so could result in
electrical shock or personal injury
from the vacuum cleaner suddenly
starting.
TO RE&lOVE LIGHT BULB
1. Disconnect power cord from electrical
outlet
\
Lens" _-_1_._
Slots
2o Pry light lens
out at slot in rear
as shown on both
sides Rotate lens
ยข up and lift off,
. CAUfioN
Do not use a bulb rated over 9W
(13V). During extended use, heat from
the bulb could overheat surrounding
plastic parts.
3. Remove the light
bulb by pulling straight
out,.
To Release
To Replace
l
4, To replace the
light bulb, carefully
insert fully into slot.
Note: See PARTS AND FEATURES for
bulb number.
CAUTION
Do not plug in or turn on until the
vacuum cleaner is completely
reassembled.
To replace light
lens, place tabs at
front of lens into
slots.. Rotate lens
down and snap
into place. Light
Lens
:AGITATOI
To maintain efficient cleaning, the agitator
must be kept free of carpet fiber, string, or
hair build-up After every 7 to t0 uses,
unplug and turn vacuum cleaner over and
check agitator for fiber and hair build-up.
Use scissors to remove any build-up entan-
gled around the agitator_
17
Loading ...
Loading ...
Loading ...