Loading ...
Loading ...
Loading ...
1. Remove light
cover by pressing
in and lifting both
sides as shown.
Push In
And Turn _"'JJ_
2. Push in and turn
bulb counterclock-
wise to remove.
3. Replace the bulb.
Bulb must not be
higher than 15 Watts
(130V). Close light
cover until it snaps in
place.
NOTE: See PARTS AND FEATURES for
Bulb #.
TO REMOVE BELT
1. Remove light cover
and light bulb as shown
under LIGHT BULB
CHANGING.
2. Unscrew the Power-
Mate s cover screws.
3. Turn Power-
Mate _ over. To
remove cover,
insert screwdriver
between nozzle
cover tab and the
base. Pry up to
release tabs.
5. Carefully
insert and lift
screwdriver at
each brush
support to
free brush
from base.
6. Remove
worn 15elt.
4. Turn Power-
Mate ®right side
up. Press handle
release pedal and
lower the swivel.
Rotate cover
-,forward from back
until front snaps
free.
Suppo_
15
Loading ...
Loading ...
Loading ...