Loading ...
Loading ...
Loading ...
Control Pad Functions
CLEAR PAD Used to
clear any function
previously entered
except the time of day UP and DOWN ARROW PADS-- Used along with the
and minute timer. Push function pads to select oven temperature, cooking
CLEAR to stop cooking, time, stop time (when programming an automatic stop
time), time of day, clean time and minute timer.
BAKE PAD Used to
b:tkie_;heod°:mal _
temperature ___ _
BROIL PAD--_._ I
Used to select _ g e O OVEN
the variable broil _..._ _ _ PREHEAT
function, g LOCK
CLEAN PAD J
Used to select the
self-cleaning
cycle,
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various functions
of the oven as described below.
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN"
light will glow each time the oven unit turns on to
maintain the set oven temperature. The "PREHEAT"
light will glow when the oven is first set to operate, or
if the desired temperature is reset higher than the
actual oven temperature. The "LOCK" light will flash
until the door locks when the self-clean cycle is in
use. It glows constantly after the door locks.
CLOCK PAD-- Used
set the time of day.
INDICATOR
LIGHTS-- These
light to show which
feature is in use.
TIMER PAD--
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
BAKE TIME PAD--
Used to enter the
length of the baking
time.
STOP TIME PAD--
Used to set the
desired stop time for
baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
The oven can be p_'oga'ammed to:
• Bake normally
• Time bake
• Broil
• Self-clean
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
for silent operation. Push and hold _. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold _ again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
"_'e_'_"{:_e_atu _e conve "sTon:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push _. "------" appears in the display.
2. Push and hold the (_ until "HI" appears in the display.
3. Push and hold _ until °F or °C appears in the display.
4. Push the (_ or (_ to change °F to °C or °C to °F.
5. Push any function pad to return to normal operating mode.
6
Loading ...
Loading ...
Loading ...