Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
First try the solutions suggested here or visit our webske at www.maytag.com/product_heJp -
if you experience
Load not rinsed
Load is wrinkled,
twisted, or tangled
Not cleaning or
removing stains
22
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
Possible Causes ! Solution
Check for proper water supply.
Not using HE detergent or using too
much HE detergent.
Washer not loaded as recommended.
The load may be out of balance.
Washer not loaded as recommended.
Wash action too long for load.
Spin speed too high for load.
The washer is not unloaded promptly.
Not choosing the right cycle for the load
being washed.
The wash water was not warm enough
to relax wrinkles.
Washer not loaded as recommended.
Not using HE detergent or using too
much HE detergent.
Hard water or high level of iron (rust)
in water.
Fabric softener dispensing ball used.
Powdered detergent used for
low-speed cycle.
Not using correct cycle for fabric type.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water flowing to the inlet
valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
The suds from non-HE detergent can cause the washer
to operate incorrectly.
Use only HE detergent. Always measure detergent and follow
manufacturer's directions based on load size and soil level.
Avoid tightly packing the washer. The washer will not rinse well
if tightly packed. Load with dry items only. See the "Cycle Guide"
for load size recommendations for each cycle.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer has started.
When load unbalance occurs, a washing process will start
to redistribute the load. This may lengthen the cycle time. Avoid
washing single items. Balance a single item such as a rug or jeans
jacket with a few extra items.
Add load loosely. Items need to move freely to reduce wrinkling and
tangling. See the "Cycle Guide" for load size recommendations for
each cycle.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Select a lower soil level. Note that items will not be cleaned as
deeply as when using a higher soil level.
Select a lower spin speed. Note that items will be wetter than when
using a higher speed spin.
Unload the washer as soon as it stops or use the Fresh Hold "j
option if you will not be able to unload the washer at the end
of the cycle.
Use the Delicates cycle or another cycle with a low spin speed to
reduce wrinkling.
If safe for load, use warm or hot wash water.
Add load loosely. Items need to move freely for best cleaning. See
the "Cycle Guide" for load size recommendations for each cycle.
Add only 1 or 2 garments after washer has started.
Use only HE detergent. Always measure detergent and follow
manufacturer's directions based on load size and soil level.
You may need to install a water softener and/or iron filter.
Dispensing balls will not operate correctly with this washer.
Add liquid fabric softener to the fabric softener compartment.
Consider using liquid detergent.
Use a higher soil level setting and warmer wash temperature
to improve cleaning.
If using Overnight Wash & Dry cycle, wash only a few items.
Use Power Wash cycle for tough cleaning.
Add an extra rinse for heavily soiled loads. .j
Loading ...
Loading ...
Loading ...